Front brake master cylinder seal

Hi guys,
Just returned from a lovely 200 mile jaunt and my right knee was soaked in brake fluid!
Looking like the master cylinder seal has perished.
Where is the best place to get a replacement seal kit?
Anybody had to tackle this job, and any tips to be aware of?
Thanks
Biff

If it's an 1100 Gs

When I did mine last year I found this kit was the cheapest, the bonus is it comes with all the bits spring etc as some places sell them individually.

Easy job just only tip is to heat up the pivot pin with a solder iron as it is loctited in and can be a real pig, may want to get a new pivot pin as well as they are pretty cheap.

Also make sure you clean it thoroughly and check that the bore where the piston goes is smooth.

https://www.louis-moto.co.uk/artike...0019379&list=e2a64167a9eb1ade5e2399f984ff5c3d

Great thanks for the tips
Ordered a kit this morning, let’s hope for fast delivery ��
I’ll let y’all know how it goes
Biff

Job done, a piece of cake really.
Just a shame about the price of the kit, when all that was needed were two seals.
Hey ho��