Bit of a long shot posting here but I really can't be arsed joining any more forums with new associated username / password etc
I've fitted a Power Commander V to my 14' bike and am interested to know what fuel / ignition maps work out, my setup is a Wings slip on with small DB killer and a Rally Raid foam filter conversion. I'm not really looking for more power as it does go like feck already with no flat spots and will easily power wheelie in 2nd..will do the same over a small rise in 3rd
I just want it to run a bit cooler ! Going to Spain soon and I don't want the fan to be running all day if preventable ( have fitted the lower temp. fan switch also ).
It's running hotter than standard but it is also running much smoother without any stalling or surging..but she does run hot.
So..the available PCV maps are for a combination of Arrows slip on / full Arrows or full Akrapovic but all with standard air filter, I've downloaded all these but have not yet uploaded to the PCV. If I go to Rottweiler I can get more compatible options but why the hell should I have to spend $50 for the privilege..each!
Anyone running a setup similar to mine but using one of the only 3 free maps from DynoJet with good results..and if so which one
I'll wire in a map switch and load 2 of them so that I can alternate but I'm curious to see what others are doing
Mike.
I've fitted a Power Commander V to my 14' bike and am interested to know what fuel / ignition maps work out, my setup is a Wings slip on with small DB killer and a Rally Raid foam filter conversion. I'm not really looking for more power as it does go like feck already with no flat spots and will easily power wheelie in 2nd..will do the same over a small rise in 3rd
I just want it to run a bit cooler ! Going to Spain soon and I don't want the fan to be running all day if preventable ( have fitted the lower temp. fan switch also ).
It's running hotter than standard but it is also running much smoother without any stalling or surging..but she does run hot.
So..the available PCV maps are for a combination of Arrows slip on / full Arrows or full Akrapovic but all with standard air filter, I've downloaded all these but have not yet uploaded to the PCV. If I go to Rottweiler I can get more compatible options but why the hell should I have to spend $50 for the privilege..each!
Anyone running a setup similar to mine but using one of the only 3 free maps from DynoJet with good results..and if so which one
I'll wire in a map switch and load 2 of them so that I can alternate but I'm curious to see what others are doing
Mike.