Hi all, Aaron (who I work with) has recently bought an R65 (electronic ignition model, not the one with the ‘bean can’).
The bike when warm over revs quite badly at standstill and I think the RH carb is over flowing with fuel leaking out the float bowl.
Initially thinking it was the float needle valve not seating correctly (and thereby not stopping the flow of fuel into the float bowl) I replaced the needle valve and for good measure the float too (just in case it had lost its buoyancy).
This hasn’t stopped the problem so I’m wondering if anyone could offer any advice and things to look at?
Thanks.
Sent from my iPhone using Tapatalk
The bike when warm over revs quite badly at standstill and I think the RH carb is over flowing with fuel leaking out the float bowl.
Initially thinking it was the float needle valve not seating correctly (and thereby not stopping the flow of fuel into the float bowl) I replaced the needle valve and for good measure the float too (just in case it had lost its buoyancy).
This hasn’t stopped the problem so I’m wondering if anyone could offer any advice and things to look at?
Thanks.
Sent from my iPhone using Tapatalk