HELP !!! - Nav 5 - Thumbwheel not working

Status
Not open for further replies.

ferguscawley

Well-known member
UKGSer Subscriber
Joined
Oct 23, 2003
Messages
1,209
Reaction score
2
Location
Cork, Ireland
Hi all

Bought a new to me 2016 GSA last week. It came with the Nav 5 cradle and thumbwheel but no Nav 5 device. Everything is wired up etc as previous owner had selected Sat Nav Prep (Opt 272)

I bought a used Nav 5 from this site and when I fit it in the crsdle and start the bike, the thumbwheel controls will not work.

Is there a need to 'pair' the bike with the new device ? What can I do to get the thumbwheel working please ??

Any help would be greatly received

Thanks

Fergus
 
Daft question: Is the ignition on?

Try a spray of WD on the mount pins and press them in a few times.
 
Thanks for reply

Yes ignition is on.

Will do the wd40 trick and try again. Thanks


====

Success

It's now working after I free'd up the contact pins
 
Last edited by a moderator:
Status
Not open for further replies.


Back
Top Bottom