Fuel vent hose correct routing

Deleted account 230327001

Registered user
Joined
Aug 12, 2018
Messages
32
Reaction score
0
Location
UK
Does anyone have a picture please of the correct routing for RHs fuel vent hose and a adventure model twin cam please!

Putting tank back on and doesn’t seem a obvious way it goes besides hanging fairly loose down

64a4a56974718b44134a4c8b820ccb2c.jpg



Thanks!


Sent from my iPhone using Tapatalk
 
I don't have a picture of it I'm afraid but it routes behind the air intake trumpet, along the frame and out by the centre stand mount. I always find it easier to separate the two hoses at the plastic junction for future reference then you don't have to try to re route it.

*edit*
https://www.topspeed.com/motorcycles/motorcycle-reviews/bmw/2010-bmw-r-1200-gs-adventure-ar81314.html

If you look at the picture of the yellow adventure at the bottom, you can see the hose in question poking out from behind the frame spar between the swingarm pivot and throttle body.
 
On the hexhead, they both exit on the LH side by the starter motor

As one of the original posts says, they come out of the tank, run down the side of air intake trumpet accrosss the back of the tank and down to the swingarm starter area
 


Back
Top Bottom