OEM alarm issues

gstom89 · Mar 26, 2020

Trying to get the alarm to function in my 2010 GSA TC.

No red light on the dash, no noise when I press the buttons, no indication of any sign of life of an alarm!

Fob has battery and tried a new fob too.

Any thoughts? No warnings come up on dash or GS911

Thanks in advance!

Santa-2512 · Mar 26, 2020

If you put new batteries in, you will need to resync the fob to the bike ...

I had

the alarm instructions in the folder for the old GS

and i sold that a couple of weeks ago...

i'll try and see if i can find em online

https://www.manualslib.com/download/368613/Bmw-Dwa-6.html

hth

gstom89 · Mar 26, 2020

I’ve tried resyncing as I found the guide/manual online but the bike does nothing!!

The red tell tale alarm light on the dash doesn’t illuminate when I remove the keys either...?

Santa-2512 · Mar 26, 2020

it wont

the alarm needs to be programmed

does the bike run?

cold be the battery in the alarm unit is dead

gstom89 · Mar 26, 2020

Bike runs normally yeh

Ian J Hartley · Mar 26, 2020

The alarm has batteries as well. Though the instrument display should tell you if the alarm batteries are low, it might be worth checking or replacing them.

gazza12adv · Mar 27, 2020

Santa-2512 said:
it wont

the alarm needs to be programmed

does the bike run?

cold be the battery in the alarm unit is dead

Should say dwalo on dash of batteries are low in the alarm unit.
https://www.ukgser.com/forums/showthread.php/501535-DWALO-ON-DASH

OEM alarm issues

gstom89

Member

Santa-2512

Omnipotent one

gstom89

Member

Santa-2512

Omnipotent one

gstom89

Member

Ian J Hartley

Well-known member

Attachments

gazza12adv

Well-known member

Similar threads