Handlebar torque settings?
- Thread starter Nutty
- Start date
Use the force,Luke..
Just do them as tight as you can by hand.
Just do them as tight as you can by hand.
As tight as you can then 1/2 turn more, it's a Ducati, they'll vibrate off anyway.
Sent from my SM-N950F using Tapatalk
Sent from my SM-N950F using Tapatalk
How can he turn them any tighter than he can turn them ???
Personally I wouldn’t bother as they’ll be removed next month when he part-exs for the XR.
1/2 in airgun at 140 psi 
Quick google suggests 24nm...
But...... it’s just google....
One option is to mark the bolt head and yoke with tip ex - or something that will wipe off after....
Re align to the mark
And watch your cable play....
But...... it’s just google....
One option is to mark the bolt head and yoke with tip ex - or something that will wipe off after....
Re align to the mark
And watch your cable play....
- Joined
- Apr 11, 2013
- Messages
- 26,383
- Reaction score
- 1,850
I think its 20NM
25nm on a 1200.
Can Nutty not search Google himself ?
So lazy.......
Can Nutty not search Google himself ?
So lazy.......
TAF
Tight as fuck.
Tight as fuck.
All done. I tightened it until I could hear a cracking noise. Happy days.
Did you use Loctite? You’ll be sorry if you didn’t
Did you use Loctite? You’ll be sorry if you didn’t
There was still loads of copper grease on the bolts when I refitted them.
- Joined
- Nov 5, 2015
- Messages
- 9,709
- Reaction score
- 1,120
Maybe not the XR yet, but they'll be off soon...
https://www.ducatiforum.co.uk/threads/ducati-workshop-manual-torque-specs-full-list.77007/
General torque settings - MS1200, but most stuff is the same....
General torque settings - MS1200, but most stuff is the same....
Similar threads
