INNOVV K2 CAMERA VIBRATION PROBLEM

Gesanners

Member
UKGSer Subscriber
Joined
Jul 5, 2020
Messages
45
Reaction score
1
Location
Birmingham
Is anyone else having a problem with extremely 'wavy' footage from their front camera? Mine is fine until I start the engine and then the 'wavy' effect kicks in, even at standstill. The rear camera is fine all of the time.

I've swapped the connections over at the DVR and the rear camera (now connected to F) is behaving the same way whilst the front camera (now R) is perfect!

I believe it's simply down to excessive vibration from the boxer engine but I've watched numerous YouTube videos concerning installation and testing of the K2 and I can't find anyone else with a similar problem?

Gerry.
 
Try putting a ferrite core around the cable near the recorder to remove interference.
 
Hi Andi, thanks for your suggestion. I'd already put ferrite cores on both camera leads but not close to the recorder itself. I'll give that a try.
 
Maybe more helpful if you move it to the right section?
 


Back
Top Bottom