2021. 1250 shaft failure

PetesBMW

Member
UKGSer Subscriber
Joined
Sep 1, 2020
Messages
11
Reaction score
0
Location
Ireland
My new 1250 ADV only 6 weeks old, drive shaft splines failed at only 294 Kms is this a common problem

Pete
 
Not a very helpful reply to a genuine issue but might get a better response in 1200/1250 LC section. To answer your question though that's not a common problem. Get it back to your dealership, should be covered by the warranty or maybe enough of an issue to reject the bike if you wanted to go that route...
 
I'm confused, this post is in the 1200-1250-GS-Watercooled section so what's the issue with it been here :nenau
 
Phew... glad I did mine, looks like I had a lucky escape waiting until 600 miles.

Sent from my SM-G981B using Tapatalk
 
Plenty on, front and back, it's the only way.
f300127696afd92cfc7faae847f541f0.jpg
17bd536abfe083ba6fdcf765da829e5a.jpg
d9841467f4c8b758a7b6c263b501efee.jpg
01565fc4777a6cda39b6e6a48d181a8b.jpg
c0e38266529174fedab90412757c4cf1.jpg
7fea6282677ca60bec6a44ae61391fb3.jpg


Sent from my SM-G981B using Tapatalk
 
Thanks you all for the help , told by the sales rep. By phone RAIN setting on a dry road would load the shaft , I was doing 15 km in first gear , when the shaft splines gave up

Pete
 
That’s what he said when he call me back a few hours ago , and they would not consider replacing the bike , these things happen he said

Pete
 
Thanks for all you help ,sales rep call a while ago and said ,RAIN setting On a dry road would load the shaft , I was I first gear doing 15 kms when the splines gave way ,I asked about a new bike and he said that out of the question ,

Pete
 


Back
Top Bottom