2012 ABS modulator pipe disconnection

StewMcGrew · Apr 16, 2021

I need to disconnect the rear brake pipes on the abs modulator so i can remove the rear subframe.

When fitting it back together do i need to do anything special when bleeding the braking system or does the brake fuild flow all through that systwm when bled?

Mistacat · Apr 16, 2021

You can thread the caliper etc through the subframe without disconnecting any pipework.
Take a couple of photos to help remember the routing for reassembly.
If you want to disconnect it bleed as a normal ( non Abs ) system, but if you get any air in the modulator you may need a GS911 to run the modulator to clear the air.

StewMcGrew · Apr 16, 2021

Mistacat said:
You can thread the caliper etc through the subframe without disconnecting any pipework.
Take a couple of photos to help remember the routing for reassembly.
If you want to disconnect it bleed as a normal ( non Abs ) system, but if you get any air in the modulator you may need a GS911 to run the modulator to clear the air.

Ive got a 911 so all shouls be ok then.

Thanks

2012 ABS modulator pipe disconnection

StewMcGrew

Registered user

Mistacat

Well-known member

StewMcGrew

Registered user

Similar threads