Front canbus spare connector

teletek · Aug 15, 2022

On my 2021 R1250 GS triple black, there is a capped-off connector (Canbus?) at the front, down the left hand side, clipped to the inner fairing panel winglet.

Does anyone know what this can be used for? Is it an ignition controlled power source, does it need a data feed? It has 3 wires feeding into it red/black, purple and brown. Thanks in advance.

Santa-2512 · Aug 15, 2022

teletek said:
On my 2021 R1250 GS triple black, there is a capped-off connector (Canbus?) at the front, down the left hand side, clipped to the inner fairing panel winglet.

Does anyone know what this can be used for? Is it an ignition controlled power source, does it need a data feed? It has 3 wires feeding into it red/black, purple and brown. Thanks in advance.

Does your bike have Nav Prep?

3 wire for Nav prep is usually +Ve -Ve & +5ve (Data pulse) if i recall

The other one is a feed for the additional fogs spots

teletek · Aug 15, 2022

hi Santa, yes it does have Nav prep already. Looking to identify this to see if its usable for powering an Qi phone charger mount.

teletek · Aug 15, 2022

CORRECTION! It has 3 wires feeding into it red/purple thin line, purple and brown. Checked with voltmeter and it doesn't supply voltage with Ign on or off.

teletek · Aug 15, 2022

Santa-2512 said:
Does your bike have Nav Prep?

3 wire for Nav prep is usually +Ve -Ve & +5ve (Data pulse) if i recall

The other one is a feed for the additional fogs spots

Would this feed need a separate fuse or connection somewhere?

Front canbus spare connector

teletek

Registered user

Santa-2512

Omnipotent one

teletek

Registered user

teletek

Registered user

teletek

Registered user

Similar threads