I am putting my 1995 back on the road. I have had to recondition the master cylinder and both front calipers with new seals. The bores of all components are in good condition.
During bleeding there are no air bubbles appearing in the clear bleed tube. However the brake leaver has long travel and is very spongy. Braking is terrible! Years ago I put braided hoses all round and had no problems at all. The brakes feel as though there is air trapped some where. There are no leaks and I have left the lever slightly pressurised using a cable tie. Has anyone and ideas or suggestions?
During bleeding there are no air bubbles appearing in the clear bleed tube. However the brake leaver has long travel and is very spongy. Braking is terrible! Years ago I put braided hoses all round and had no problems at all. The brakes feel as though there is air trapped some where. There are no leaks and I have left the lever slightly pressurised using a cable tie. Has anyone and ideas or suggestions?