1100 swinging arm in an Airhead

jeez dick o turpin :D
hundred pounds for a bit of old steel.
if you can get the price down,


i will give ye twenty euro's for one. ;) :beerjug:






good luck with the project. :thumb
 
All machined from case hardened steel

theres your problem - you don't machine stuff fromm case hardened steel - you case harden it after machining.

Also - are you sure you want it case hardened ? That's more for shock-loaded parts that need a bit of flexibility - like gear pinions.

EN26 would do the job :thumb
 
motomartin said:
All machined from case hardened steel

theres your problem - you don't machine stuff fromm case hardened steel - you case harden it after machining.

Also - are you sure you want it case hardened ? That's more for shock-loaded parts that need a bit of flexibility - like gear pinions.

EN26 would do the job :thumb
Click to expand...

does that mean problems with it then?
 
Could be interested in one myself...Have you seen one in the flesh ?..If not how did you get all the correct dimensions because thats critical
 
Civil,
I'm also interested, let me know when you have them.
Andy
 
1150 swinging arm in an Airhead

All,
I've seen the posts on the 1100 swinging arm, does the 1150 version fit in the same way? if so is the drive shaft the same at the gearbox end? and will Civils adaptor fit?

Cheers,
Andy
 
So it seems charly batty! :okay

Doesn't look all too bad with that longer swingarm as well :). There's still the offset situation that causes the rear wheel not to align with the front but it doesn't seem to hurt the driveability, looks funny though lol.

I've got my swingarm drawed out in solidworks now and should get started fabricating, if I have my hands on an adapter. No point in all that work if I couldn't connect the axle to the gearbox.
 
Do you still make them ??

the civil one said:
The Price goes Down.
I have everything in Place .
To-date heres how shes cuttin the Mustard.
For 1 its gonnie cost £200
For 5-10 its gonnie cost £140
For 10 or More , £100 ,
All machined from case hardened steel
These will be a reality soon ,
Being machined by a specialist shop.
Who wants one ?.
Click to expand...

Hi do you still make them or you might have one for sale ??
Thanks for help
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

Vulpine2
Final drive advice...
Replies
4
Views
408
Vulpine2
Vulpine2
Want to find a switched live - R100CS
Replies
6
Views
217
casbar
Airhead specials - Suspension
Replies
18
Views
1,658
dean0n0
dean0n0
My ongoing luggage addiction
Replies
5
Views
410
steve hughes
steve hughes
fizzer
r1150rt input shaft
Replies
5
Views
482
DrFarkoff
DrFarkoff


Back
Top Bottom