1100GS Engine Bars

[sloukes]

Dunno if this really belongs in technical , but here goes.
A while ago I bought these engine bars from someone here [1] and have only just got round to fitting them.Actually its a case of not fitting them , hence the post....

I seem to have tried all permutations of each pieces position but the engine appears to be in the way of them actually bolting to anything. Anyone recognise the make and know which bit goes where , or better still have any photos of them fitted to a bike?

<a href="http://photobucket.com/" target="_blank"><img src="http://img.photobucket.com/albums/v336/sloukes/DSCN0129.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

[1] I think they are either TT or H&B , but being a numpty have deleted all of the pm's concerning buying them!

Cheers

Steve

 

[Steptoe]

The two angled pieces on the right in the picture mount under the sump plate. In the picture, the top right bar mounts to the left hand side, and bottom right bar, mounts to the right side.

The two bendy arms mount on the front fairing frame mounting points on the frame at the front under the tank.
They bolt to the bars coming up from the sump.
The other supporting bars join the two across the front of the engine going across the alternator cover.

 

[Colban]

They are Touratech (same as mine).

 

[sloukes]

The two angled pieces on the right in the picture mount under the sump plate. In the picture, the top right bar mounts to the left hand side, and bottom right bar, mounts to the right side.

The two bendy arms mount on the front fairing frame mounting points on the frame at the front under the tank.
They bolt to the bars coming up from the sump.
The other supporting bars join the two across the front of the engine going across the alternator cover.

Cheers Steptoe , much appreciated.

Steve