niko
Registered user
hi there
i wonder if you would mind helping me out
my bike is surging badly
done tb balance ,
set tps to .38
rocker end float set to minimum
and valve gaps correct
needle bouncing around on rev counter so fitted new hall sensor ,its still bouncing around
i measured the resistance on the coil
from the net i believe it should be
primary 0.5 (mine read 0.6 )
secondary 13 (mine read 7 )
can anyone confirm that these are the correct readings for the coil and that mines breaking down
and also would this cause the surging
i wonder if you would mind helping me out
my bike is surging badly
done tb balance ,
set tps to .38
rocker end float set to minimum
and valve gaps correct
needle bouncing around on rev counter so fitted new hall sensor ,its still bouncing around
i measured the resistance on the coil
from the net i believe it should be
primary 0.5 (mine read 0.6 )
secondary 13 (mine read 7 )
can anyone confirm that these are the correct readings for the coil and that mines breaking down
and also would this cause the surging


