1150GS Sidestand Plate

[Bananaman]

Anyone know where to obtain a sidestand plate for an 1150GS ?

Nippy Norman does one for the 1200GS but I cant seem to locate one for the 1150. I would like a good quality one, not just bolting on a piece of tin can or a piece of rubber, but a nice looking one fit for purpose that looks well on the bike.
"Why spoil it for a hapeth of tar? " was what my gran used to say

 

[Doughboy]

Try Wunderlich here:
Sidestand plate

 

[Steve]

Nippy does this one for the 1100/1150, or were you looking to increase the area rather than the length?

 

[Bananaman]

Thanks Steve, was looking for one like Doughboy suggested.
Will contact Wunderlich for one
Cheers

 

[ELIMINATOR]

or were you looking to increase the area rather than the length

 

[Doughboy]

Bananaman - Touratech also do one a bit cheaper but you may have to wait a bit longer !
Touratech

 

[harlequin6]

Anyone know where to obtain a sidestand plate for an 1150GS ?

Nippy Norman does one for the 1200GS but I cant seem to locate one for the 1150. I would like a good quality one, not just bolting on a piece of tin can or a piece of rubber, but a nice looking one fit for purpose that looks well on the bike.
"Why spoil it for a hapeth of tar? " was what my gran used to say

Hi,

Don't mess abaaht with all that poncey stuff. I got an ice Hockey puck


cost 1.00

Helps loads getting the bike upright with all the gear loaded on and saves arsing around with a placcy thing / coke can / bit of wood when on soft grounb

Each to their own ,

H6

 

[Lou Can]

I got one for £14 from here:

Side stand plate

....and very good it is too.

LC

 

[John Armstrong]

Hi,

Don't mess abaaht with all that poncey stuff. I got an ice Hockey puck


cost 1.00

Helps loads getting the bike upright with all the gear loaded on and saves arsing around with a placcy thing / coke can / bit of wood when on soft grounb

Each to their own ,

H6

Like H6, got a black hockey puck off fleabay and one of these for the 1150 GS, lot less lean angle on my GSA, and it doesn't look too out of place either.

 

[ovenpaa]

Hi,

Don't mess abaaht with all that poncey stuff. I got an ice Hockey puck


cost 1.00

Helps loads getting the bike upright with all the gear loaded on and saves arsing around with a placcy thing / coke can / bit of wood when on soft grounb

I agree 100% a Hockey Puck rocks - works on soft ground and makes life 100 times easier when standing a fully loaded bike up at petrol stations etc. I used 3XM6 roof bolts and drilled the puck M5 - the bolts act as self tappers and will never fall out

Mine was 2 quid though

 

[Doughboy]

"Why spoil it for a hapeth of tar? " was what my gran used to say

If he wants to spend the money - let him !!