1200 Oil Cooler Grill

[CONDORPILOT]

gazza,Nice set up ..SUPPLIER DETAILS AND TEST REPORTS IF YOU DON'T MIND PLEASE

Aux lights...?
Beak..TT?
crash bars..H&B?

 

[gazza]

gazza,Nice set up ..SUPPLIER DETAILS AND TEST REPORTS IF YOU DON'T MIND PLEASE

Aux lights...?
Beak..TT?
crash bars..H&B?

Aux Lights.......................Crap from Halfords. To much vibration destroys them poxy H3 bulbs. After changing them 3 times that was enough.
Now have these FF50's mounted to my own light assembly.

Yes beak is from TT and costs very little if I remember correctly.
No drilling to fit it, just slides over the existing beak and is secured either side using the existing beak screws.

Crash bars are as you say H&B cost about £115 from Motobins.

 

[Beemer]

it's quality piece of kit that Brian makes, as is the rear spray deflector.

Brian,

I'm thinking of losing my OE rear spray deflector and would be very interested to see what you produce as a replacement.

Is it similar to the TT one that fits to the bottom edge of the number plate? Any chance of a photo from someone who's got one please?



Steve

 

[Beemer]

Aux Lights.......................Crap from Halfords. To much vibration destroys them poxy H3 bulbs. After changing them 3 times that was enough.
Now have these FF50's mounted to my own light assembly.

Yes beak is from TT and costs very little if I remember correctly.
No drilling to fit it, just slides over the existing beak and is secured either side using the existing beak screws.

Crash bars are as you say H&B cost about £115 from Motobins.

Gazza,

Never mind the bike!! What a great selection of beer!!!!



:drinkinpa

Steve

 

[CONDORPILOT]

Ta gazza ,even nicer with ff50's on!

 

[Raindancer]

Aux Lights & Beak

Aux Lights.......................Crap from Halfords. To much vibration destroys them poxy H3 bulbs. After changing them 3 times that was enough.
Now have these FF50's mounted to my own light assembly.

Yes beak is from TT and costs very little if I remember correctly.
No drilling to fit it, just slides over the existing beak and is secured either side using the existing beak screws.

Crash bars are as you say H&B cost about £115 from Motobins.

Gazza

Just been reading the thread on your extra bike bits. BIke looks absolutely brill. Where or who are TT and where did you get the FF50 lights from.

Thanks

Dan

 

[gazza]

Re: Aux Lights & Beak

Gazza

Where or who are TT and where did you get the FF50 lights from.

Thanks

Dan

TT = Touratech Beak extender TT part # 044-0310

Hella FF50 lights from Noel on the board.

 

[Dahoum]

Gazza,
Never mind the bike!! What a great selection of beer!!
Steve

Thats not beer - it's fizzy p*ss. Boys drinks

 

[Raindancer]

Re: Re: Aux Lights & Beak

TT = Touratech Beak extender TT part # 044-0310

Hella FF50 lights from Noel on the board.

Gazza

Thanks for that....Found the beak.

Sorry to be so dumb but where do I findNorman on the board for the FF50 lights.

Dan

 

[gazza]

Not Norman, Noel. Use the CONTACT button at the top of each page and find "OTHER UKGSER MEMBER" or just follow this Link

 

[Raindancer]

Conatc Noel

Thanks Gazza.


Dan

 

[Eddy802]

Perfect addition to my Oil Grill cover...

... I've had the grill cover for some time now, and whilst I was impressed with the workmanship and the customer service experience that came with it, I always felt it was lacking a little something.

Until Tuesday, when I decided to add an R1200GS to it!! What a revelation!



Now it's a Stainless, Red, Black and Black beauty.

Nice one Reyno.

 

[Dahoum]

I've asked this before but....

How many people on here have had stone damage to their oil cooler?? Or even known people who have?? No me neither.

You are all posers who'll part with their money the same as all fashion victims.

 

[GSmonkey]

I've asked this before but....

How many people on here have had stone damage to their oil cooler?? Or even known people who have?? No me neither.

You are all posers who'll part with their money the same as all fashion victims.

When I took the beak off mine a few weeks ago, I noticed that some of the fins were bent over from stone damage. Nothing bad enough to cause a leak however.

Owned another other oil cooled bike with the rad in a more exposed position without a guard.

 

[Fanum]

I've asked this before but....

How many people on here have had stone damage to their oil cooler?? Or even known people who have?? No me neither.

You are all posers who'll part with their money the same as all fashion victims.

Yep, of course we are, you're absolutely right.

And your point??

 

[Dahoum]

Yep, of course we are, you're absolutely right.

And your point??

Is made

 

[JimVonBaden]

Big thanks to Brian Reynolds for making me a Stainless Oil Cooler Grill. Fits perfect and took about a minute to fit. If you fancy one ask Brian ( Reyno ).

I'd be very interested in one. Can you e-mail me a quote to JimVonBaden at msn.com? I live in Fairfax, Virginia zip code 22030

Thanks,

Jim

 

[nadeem]

Nippy Norman sells them Jim - see here he ships to the US as well.

 

[Doyles]

Hi Brian
was looking at your oil cooler protectors can you tell me how much.

 

[Bryn]

Hi Brian
was looking at your oil cooler protectors can you tell me how much.

Welcome to the site... Drop him an email at [email protected]

It would be worth becoming a subscriber while you're at it...It would pay for itself on no time.