12GSA high quality pics

[jnrobert]

Looks like Bakerman took Sir Gallahad to the show. And what's with the bloke on the left? "I love the smell of a new bike in the morning" ?

 

[Den]

Here........ This paintbox thing is fun on a rainy day. Ive just refined me superrattymoto gs

 

[GSmonkey]

Just a comment... those pictures are 2000 pixels wide... way too big... about 800 pixels is as big as you should go.

....now resized to 800

 

[cdw]

12 GSA High Quality Pics

Yes it looks so much better than the standard GS12. The screen looks difficult to keep clean with road crud getting trapped between the 2 bits however.

Anybody know the seat height, even the low seat option on mine is a bit tall for a short person like me.

The bigger tank range would be really welcome as 200 miles between fill-ups is too low for European service stations distances a lot of the time.

Regards

Chris

 

[BTBR]

Yes it looks so much better than the standard GS12. The screen looks difficult to keep clean with road crud getting trapped between the 2 bits however.

Anybody know the seat height, even the low seat option on mine is a bit tall for a short person like me.

The bigger tank range would be really welcome as 200 miles between fill-ups is too low for European service stations distances a lot of the time.

Regards

Chris

895mm low....yes thats the low setting! and 915mm high!

BTBR

 

[BiG DoM]

Having seen the beast in the flesh, I'm not at all certain that BMW's done the best thing with the choice of finishes. For a start I hate the large R1200 logo on the tank. It would get the hairdryer treatment on day 1 and be replaced with the far more suble R1200 logo found on the 1200GS.

And I don't like the olive tank flank. I would either replace it with the silver one from the 1200GS or paint it.

Chatting to several visitors on the stand, almost all seemed to want to have a choice over seat and tank flank colours, "Why can't I have a black/red seat with Matt Aluminium tank?"

As for the tank colours... I love the Matt Aluminium finish on the 1150GSA tank, but on the 1200GSA it doesn't work for me. I think it's because it's predominantly on a single flatish area, so I've had a quick play to see what might happen with a paint job.

I must agree with Zmeg re the colours - I would personally prefer the red and black seat with the Alu paintwork...kinda classic ADV (they did not bring the black and yellow version to SA). They really should give a mix and match option, much like the 'basic!' GS.

Can you confirm is the black we are seeing the actual tank fuel cell? Is the top "flank" black piece just cosmetic (nice to have the full enamel roundel back as in the 1150 ADV IMHO) and is it aluminium? I feel that the olive looks out of place with the grey of the black grey seat... if the seat grey was the same olive...? All too drab for me actually.

Is the screen all one piece? or is there an adjustable section ala GIVI? or is that just part of the angular trend style moulding?

I still find it strange that there is no ADVENTURE moniker anywhere on the bike - even on the back plate it just says R1150GS ?

Also I have questions as to what degree the rear sub frame is different - some are saying significantly reinforced, the PRO stuff seems to indicate merely modified a bit for the new rack frame... I will be highly unimpressed if some of it bolts to that Tupperware stuff at the back - I have seen numerous failures of it. There may have been a necessity to also modify frame somewhat for new centre stand??

Anyway I WANT ONE!

 

[BTBR]

I must agree with Zmeg re the colours - I would personally prefer the red and black seat with the Alu paintwork...kinda classic ADV (they did not bring the black and yellow version to SA). They really should give a mix and match option, much like the 'basic!' GS.

Can you confirm is the black we are seeing the actual tank fuel cell? Is the top "flank" black piece just cosmetic (nice to have the full enamel roundel back as in the 1150 ADV IMHO) and is it aluminium? I feel that the olive looks out of place with the grey of the black grey seat... if the seat grey was the same olive...? All too drab for me actually.

Is the screen all one piece? or is there an adjustable section ala GIVI? or is that just part of the angular trend style moulding?

I still find it strange that there is no ADVENTURE moniker anywhere on the bike - even on the back plate it just says R1150GS ?

Also I have questions as to what degree the rear sub frame is different - some are saying significantly reinforced, the PRO stuff seems to indicate merely modified a bit for the new rack frame... I will be highly unimpressed if some of it bolts to that Tupperware stuff at the back - I have seen numerous failures of it. There may have been a necessity to also modify frame somewhat for new centre stand??

Anyway I WANT ONE!

In reply to your questions:-

1) All the panels are just that, panels! The tank is underneath and is a one piece
plastic moulding. (This is what I have been told anyway)

2) I agree about the colour scheme as well. Personally, I think that they should have had it silver with black/red silver. But as all the parts are only plastic panels, they could be replaced to suit your own taste at a later stage, or if they get damaged, which ever is the sooner! Don't know at what cost though?

3) The screen is of a one piece construction, and it is adjustable just like the current 1200 one is.

4) On the tank side panels, olive green for example, it does have the "GS" letter embossed in them. Not very clear and transfers would have been better IMHO?

5) The rear seating subframe is the same as the current model, the increase in strength is on the actual bike frame underneath it. (This is what I have been told anyway) It is also very likely, but has yet to be confirmed, that the low seat from the 1200 will also fit, if so desired.

Hope this helps?

BTBR

 

[Deadskin]

BTBR
Hopefully the 1200GS low seat will fit
I'm guessing the shocks are around 20 mm longer
just like on the 1150 ADV,
so hope for the normal sized people

 

[Tim Cullis]

The top black part with the roundel is a plastic cover; the same material and finish as the matt black plastic cover used on some 12GS bikes (others are grey).

The bottom black part that you can see and which is protected by the loop of the crash bars is the lower part of the actual tank which extends upwards underneath the top black panel, the olive tank flank and the matt aluminium tank top.

The GS lettering on the tank flank panel (olive bit) is the same as the 12GS.

Significantly reinforced is what I was told.

Tim

 

[Tim Cullis]

Guide prices

Basic bike.............. £9600 (engine bars and valve covers standard)
ABS....................... £ 795
Heated grips........... £ 195
Onboard computer.. £ 110
Fog lights............... £ 200
White indicators....... £ 22
Antitheft................. £ 175
chrome exhaust........ £ 70
Pannier frames........ £ 250 )
top box................... £ ??? ) about £1000
panniers.................. £ ??? )

So for the bike with ABS, grips, antitheft, fogs, luggage and TKC tyres (no charge) it would be around £12,000.

Tim

 

[Meath]

a grand for a top box? i think i'll be getting after market panniers and top box!

 

[Tim Cullis]

Sorry, the formatting didn't quite work. Prices of topbox and panniers isn't available but I was told around £1000 for pannier frames, panniers and top box.

Tim

 

[Meath]

ah, that sounds a lot better. that still puts the price up to €19,500 in ireland for abs, alarm, panniers and heated grips. ah, but what the hell, it's worth it

 

[Ba55man]

Heres my effort Den......

 

[Bikergary]

This bike is .. WOW, saw it yesturday as well at the NEC, This would be the only 12 I would get, but sounds like i need to Grow..... quite a bit :-(

 

[GSPeP]

More news on the R1200GSA on 15 dec.

http://www.bmw-motorrad2.com/bmwmr_crm_net_news/news_websites/index_frame.asp?meldung=2685

 

[Skip69]

Are there more pictures taken of the bike besides the ones I've seen here? Because of the EICMA in Milan, the Dutch MotoRai was to be held in february next year instead of november this year. Now it's cancelled I've to manage to visit Brussels or be patient and wait till the introduction at the end of march next year... and I just can't wait to see the real thing...

 

[darkhorse]

Data sheet

Engine

Type Air/oil-cooled 2-cylinder 4-stroke Boxer engine, one camshaft and four valves per cylinder, central compensation shaft

Bore / stroke 101 mm x 73 mm

Capacity 1,170 ccm

Rated output 74 kW (100 bhp) at 7,000 rpm

Max. torque 115 Nm at 5,500 rpm

Compression ratio 11.0:1

Mixture control / engine management Electronic intake pipe injection/digital engine management: BMS-K with overrun fuel cut-off, dual ignition

Emission control Closed-loop 3-way catalytic converter


Performance / Consumption

Maximum speed More than 200 km/h

Fuel consumption over 100 km at constant 90 km/h 4,6 l

Fuel consumption over 100 km at constant 120 km/h 6,1 l

Fuel type Unleaded premium, octane rumber 95 (RON), can also be operated with minimum octane number 91 (RON) due to automatic knock control.


Electrics

Alternator 720 W three-phase alternator

Battery 12 V / 14 Ah


Power transmission

Clutch Single-disc dry clutch, hydraulically operated

Gearbox Constant mesh 6-speed gearbox with helical gearing

Drive Shaft drive


Chassis / Brakes

Frame Three-section frame consisting of front and rear section, load bearing engine-gearbox unit

Front wheel location / suspension BMW Motorrad Telelever;stanchion diameter 41 mm, central spring strut, spring pre-load 9-times mechanically adjustable

Rear wheel location / suspension Die-cast aluminium single-sided swinging arm with BMW Motorrad Paralever; WAD strut (travel-related damping), spring pre-load hydraulically adjustable to continuously variable levels by means of handwheel, rebound damping adjustable

Travel front/rear 210 mm / 220 mm

Wheelbase (in normal position) 1,511 mm

Castor (in normal position) 97,6 mm

Steering head angle (in normal position) 63,8°

Wheels Cross-spoked wheels

Rim front 2.50 x 19"

Rim rear 4.00 x 17"

Tyres front 110/80 - R 19

Tyres rear 150/70 - R 17

Brake front EVO brake system with dual disc, floating brake discs, 305 mm diameter, four-piston fixed caliper

Brake rear Single disc brake, diameter 265 mm, double-piston floating caliper

ABS Special equipment BMW Motorrad Integral ABS (part-integral), disengageable


Dimensions / Weights

Length 2,250 mm

Width (inc. mirrors) 955 mm

Height (not inc. mirrors) 1,470 mm

Seat height, unladen weight 910 / 890 mm

Unladen weight, road ready, fully fuelled 1) 256 kg

Dry weight 2) 223 kg

Permitted total weight 475 kg

Payload (with standard equipment) 219 kg

Usable tank volume 33.0 l

Reserve Approx. 4.0 l




1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids

 

[GSPeP]

Can now be seen at the International Motor Show Brussels 2006 (till 22 january)

More here: Brussels 2006

 

[gavin@iow]

This is a bike fer crissakes it's not meant to be serious.


BMW haven't built a bike to fulfill peoples dreams only to enable them to have dreams and it will sell by the bucket load and will fill pub and cafe car parks the world over

Well said Judge, my 12GS waits in the garage for the sun to shine, and the roads to dry out. I have dreams of travelling, that may never happen, but when i'm riding to where ever, nothing else matters, a 5 mile ride or a 50 mile ride puts the same smile on my face,..........will the beak and the alloy rocker cover protectors from the adventure fit the 12GS?, they'll look nice in the garage, while i'm dreaming of spring and summer.