1998 1100 rt gearbox removal (Steptoe,s)

[(RIP) Mark H]

I,ve read Steptoes post about removing gearbox / swingarm / final drive in one peice on the 1100 / 1150's (very good thanks Steptoe) I ask if its possible do to the same method with the R1100 RT ?

 

[blanc]

Is there a sticky for the gearbox removal? Cant find it!

 

[Pekkavee]

Is there a sticky for the gearbox removal? Cant find it!

Here is something
Steptoe advices
It should work also in R1100RT

Pekka

 

[(RIP) Mark H]

Thanks "Pekka" I have found that post, I have to do the job on a R1100RT and I,m asking if there are any differences in removing the box, swingarm, F/D with that model,
I have been searching the site for info on replacing the clutch on R1100 / 1150, in particular removing the box, swingarm, final drive, in one piece,

I have found the following links so far;

http://www.advrider.com/forums/showthread.php?t=52306


http://www.ukgser.com/forums/showthread.php?t=228624&highlight=gearbox+removal

http://www.ukgser.com/forums/showthread.php?t=161167&highlight=CLUTCH+FITTEDugg


http://www.ukgser.com/forums/showthread.php?t=160862&highlight=gearbox+removal

http://www.ukgser.com/forums/showthread.php?t=153714&highlight=steptoe


Any info on removing the box, swingarm, F/Drive particular to R1100RT would be appreciated ..Ta

Also, are the clutch parts avaliable from BMW the same as those offered by Sherlock, Motobins, Motorworks etc???

 

[Kawanor]

1150rt

I did the job,on my RT,change the clutch..I have great help from the GS Forum..It is more or less the same as on a GS,,but it is more "plastic" shit to remove..Reember to take MANY picture,when you disassemble the parts,,I`l need the pic. when you put tings together again..
Disassemble/mount the Air filter Box,stil gives me nightmare...

I have the job on my web. side,,but it is al in Norwegian..

http://www.kawanor.net/2008/11/rt.htm

I`l never do that job again...