2008 GSA winglets vs Nippy Normans version.

[ElliotGSA]

I bought a set from Tuftywhite (thanks ) through the wanted page here as mine were cracked around the bolt holes.

Easy replacement as you'd expect...

I was out on a run today and was amazed with the difference, there was far less turbulence and buffeting behind the screen.
I never even expected to notice a difference for such a small piece of plastic.

Sent from my SM-T560 using Tapatalk

 

[tuftywhite]

Glad they worked out for you. I never got to put them on!

 

[Bendy toy]

The OEM winglets all seem to crack and craze around the bolt holes. I got a pair from ebay that have lasted much better for about £30 the pair. I used some trimmed off silicone oil hose (5mm thick) as soft washers between winglet and beak top. No cracking so far.

 

[ElliotGSA]

I too used some rubber washers to pad out the gap and give a little flex. The RH side is a bit snug to the tank so I've added another washer too. The LH is perfect.

Sent from my SM-A300FU using Tapatalk