2010 Anniversary GSA sidestand help

[Jacal]

can anyone help ?

I have just bought a sidestand 'Hoof' from this site and it doesn't fit my 2010 Anniversary GSA, it fouls the mainstand when made to fit.

What I need to know is there a difference in this side stand to the 2010 GSA ?

Any help would be much appreciated.

 

[rattler]

No problem with mine

 

[Dainese Brave]

I think there is a difference.....I know Wunderlich list a different part for their excellent sidestand enlarger for 2010 on models.

I went from an 06 GSA to a 2010 GSA and my old one wouldn't fit.

 

[rocky burns]

I think there is a difference.....I know Wunderlich list a different part for their excellent sidestand enlarger for 2010 on models.

I went from an 06 GSA to a 2010 GSA and my old one wouldn't fit.

I just put my touratech one from my 06 gsa to my 10 plate aniversary and it went straight on

 

[rodders]

I've just bought one for 30th aniv GS and it fits fine

 

[rodders]

maybe a pic might shed light on problem/difference of stand etc

 

[Jacal]

Thanks lads...Will try to get some picks but its hard to photo while sitting on the bike.

Will try to prop it up some how, or get help.

 

[Pablo1]

Thanks lads...Will try to get some picks but its hard to photo while sitting on the bike.

Will try to prop it up some how, or get help.

ffs put in on the centre stand and photo it

 

[Jacal]

ffs put in on the centre stand and photo it

It's the centre stand that fouls. Please read the thread if you want to contribute which would then be more than welcome.

 

[Dainese Brave]

I just put my touratech one from my 06 gsa to my 10 plate aniversary and it went straight on

The Wunderlich version has an insert for the foot plate, I'm sure when I switched mine over the '10 sidestand 'foot' was slightly bigger and wouldn't fit. It also would have hit the exhaust, which I think is the OP's problem...the newer model didn't.

 

[Jacal]

Cheers DB although it just misses the exhaust I would imagine on a bumpy road it would hit BUT the main concern is it definitely fouls the mainstand.

Hope this works. This is the shape of the foot and however I try and want it to fit it won't without the centre stand fouling in the upright position.

 

[Pablo1]

Cheers DB although it just misses the exhaust I would imagine on a bumpy road it would hit BUT the main concern is it definitely fouls the mainstand.

Hope this works. This is the shape of the foot and however I try and want it to fit it won't without the centre stand fouling in the upright position.

errr looks as though you have it on ctre stand then

or are you hanging upside down while photographing

 

[Jacal]

The photo - as you rightly say- was taken with the bike on the centre stand BUT it only shows the foot of the side stand.

The ideal solution would be to take photo's of the unit fouling the exhaust and silencer - BUT you already know that and are just trying to provoke reaction.

Please take it somewhere else if your don't wish to help, it would be much appreciated.

 

[(RIP) 163phil]

Do you have a grinder?

Sorry for stating the bleedin' obvious, but if it fouls it's a little too large.

 

[Dainese Brave]

If it really doesn't fit, then I'd suggest maybe putting it up for sale on here, stating it doesn't fit '10 on models, then buy a model appropriate one. You'll probably only lose a couple of quid on the deal.

 

[Pablo1]

The photo - as you rightly say- was taken with the bike on the centre stand BUT it only shows the foot of the side stand.

The ideal solution would be to take photo's of the unit fouling the exhaust and silencer - BUT you already know that and are just trying to provoke reaction.

Please take it somewhere else if your don't wish to help, it would be much appreciated.

My apologies I'm not trying to provoke, only I thought, stating the obvious.
im presuming now you mean it fowls the centre stand in its retracted position?
as already suggested, just flog it on here and get one of these
http://www.adventureparts.co.uk/epa...aaq6tkqv/Products/"Cameltoe BMW 1200 GS - SS"

 

[Jacal]

Do you have a grinder?

Sorry for stating the bleedin' obvious, but if it fouls it's a little too large.

Yep! Just a shame it was advertised as fitting the GS/GSA

If it really doesn't fit, then I'd suggest maybe putting it up for sale on here, stating it doesn't fit '10 on models, then buy a model appropriate one. You'll probably only lose a couple of quid on the deal.

These are for sale at £23 PP gift which is nearer £24, to sell on and the postage cost, I would probably loose more than a "couple of quid", all within a week for an item I was told would fit.

My apologies I'm not trying to provoke, only I thought, stating the obvious.
im presuming now you mean it fowls the centre stand in its retracted position?
as already suggested, just flog it on here and get one of these
http://www.adventureparts.co.uk/epa...aaq6tkqv/Products/"Cameltoe BMW 1200 GS - SS"

Thank you Pablo and it looks like that's the only route left for me.

 

[JayC]

Jacal , perhaps if you could ID P/Nos for both the 2010 GSA and the 2010 Anniversary GSA this may help?
I would suggest comparing Nos for both stands and the exhaust. It may just be your only sure fire answer.

 

[JayC]

Yep! Just a shame it was advertised as fitting the GS/GSA

These are for sale at £23 PP gift which is nearer £24, to sell on and the postage cost, I would probably loose more than a "couple of quid", all within a week for an item I was told would fit.

Thank you Pablo and it looks like that's the only route left for me.

Before this gets out of hand let's clear two things up:

1) It FITS the GSA , others have stated such.
2) I have offered you a refund provided you can meet certain conditions!

 

[slimpickings]

I have one of these 2011 GSA no problem with the fit

Jacal, is it possible that your side stand is bent. or maybe not fitted properly

Not much good buying a camel toe and having a similar problem