ABS motor rebuild kit/carbon brushes

[db-89]

Not another hexhead abs thread

Brushes stuck im my 07,have it apart and put a ford one in for the moment. Does anyone do a rebuilt kit for these like the bmw car ones or does anyone even have a website to buy the brushes from?

Thanks in advance gents

 

[botus]

VW do a kit but its £500 - part of the resolution the court ordered to a class action lawsuit they lost - for using same junk spec as BMW - Ford ordered the correct specs on their modules

as most vehicles use the same junk, in countries that have a functioning legal system for the common man, these cases are all the rage

Hyundai ABS Module Recall Inadequate, Alleges Lawsuit

A Hyundai ABS module recall has caused a class action lawsuit which alleges these Hyundai and Kia vehicles are at risk of fires from short circuits in the anti-lock braking system modules.

www.carcomplaints.com

Class Action Says 2017-2018 Ram 2500, 3500 Equipped with Defective Anti-Lock Braking Systems

A class action alleges certain Ram 2500 and 3500 pickups are unsafe because they’re equipped with defective hydraulic control units and anti-lock braking systems.

www.classaction.org

and I didn't mean this more recent VW one - https://www.claimdepot.com/settlements/volkswagen-group-of-america-inc-auto

 

[Pukmeister]

We aren’t the USA and don’t do class action lawsuits.

That’s how our law works. You are on your own pal.

 

[er-minio]

put a ford one in for the moment

It can probably stay in more than "for the moment"

My electric ABS unit (2007 GSA non servo) was first serviced and fixed by a skilled mechanic. It then failed again many years and miles later and took it to myself (boredom) to fix it.
I couldn't find the Fiesta motor and used a BMW Series 1 model that seems very similar.

Been in there for years and many miles, not an issue.

I'd be interested to find a servicing kit too.
In the meantime I "stocked" on a few extra electric motors and added threaded holes (very shallow of course) to the ABS modulator unit so I can unscrew and screw back on the tabs that keep said motor in place on top of the unit.