Additional Lights Switch

[red1]

Has anyone any advice on a decent handlebar switch for controlling a pair of LED lights?

There's loads of stuff out there, but I'd like to use something that's been used by other riders.
TIA

 

[MickTheSaw]

Hi Batts,just wire in a PDM60 or similar and run everything from that lights,heated vest etc
I never bothered with the light switch on my XR as I wanted them on when the bike was running and turned off when the ignition was off.

 

[Deleted account 191119001]

denali stuff is really well built and you can just buy the parts you need.

https://www.twistedthrottle.com/denali-2-0-premium-wiring-harness-kit

 

[beaver]

The guy wants a £5 switch... not a $75 control system....
Plenty on Ebay, but make sure the ARE waterproof

 

[Deleted account 191119001]

The guy wants a £5 switch... not a $75 control system....
Plenty on Ebay, but make sure the ARE waterproof

Denali switch alone is only 20 quid and totally waterproof, not sure what other parts he would need, maybe brackets as they are not included.

https://www.twistedthrottle.com/denali-2-0-hi-low-off-switch-waterproof

 

[red1]

Thanks for input. I think I might just tap into the fuse box for an ignition live feed for the lights and straight to battery for heated gear. Bit overkill £200 for control box.

 

[Deleted account 191119001]

Thanks for input. I think I might just tap into the fuse box for an ignition live feed for the lights and straight to battery for heated gear. Bit overkill £200 for control box.

Just remember if you travel overseas some places do not allow Aux lights to be on all the time, you need to be able to turn them off with a switch.