airhead project

[r100/7]

hi all i have just got all the parts needed to finish my r100/7 project in the post so i should have it running and ready for a MOT in the next few weeks and then a respray when i can save up the money. i will be fitting a suzuki rm rear mudguard , mini indicators , moto x bars and will be adjusting the front mudguard to. i will be putting up photos when i have done the work

 

[brassmonkey001]

hi all i have just got all the parts needed to finish my r100/7 project in the post so i should have it running and ready for a MOT in the next few weeks and then a respray when i can save up the money. i will be fitting a suzuki rm rear mudguard , mini indicators , moto x bars and will be adjusting the front mudguard to. i will be putting up photos when i have done the work

Don't forget the "before" pics as well.

 

[r100/7]

it had a big rs fairing what was broken and a broken front brake and bad wiring i cant get the photos to up load i will try and sort out them later

 

[r100/7]

up date

i have just got my new rm rear mudguard fitted to my bike and my new smaller flashers on to it and have sorted my wiring and got my clutch cable sorted.
i will be ordering new throttle cable getting my starter sorted and my front brake conversion done.
will post a photo when its finshed

 

[r100/7]

seat lock

hi
does any body now if it is easy to fit a new seat lock to my r100/7
as i have not got the key for my seat lock and i have found any /7 key will open it

thanks

 

[r100/7]

the bike

he is the bike as that it looked like b4 i started
the photo is of google as my own photo would not load up lol
the bike had a rs big fairing that was broken and no keys and lots of rust and dirt

i have fitted a new rear mudguard mini flasher and a handle bar m/c and a new single seat
i have just got to get the final bit of brake hose and the get the starter back from the shop and i be able to test it

 

[r100/7]

hi all just wondering if any body can help me with posting photos as i can post a photo from Google but not from my pc

 

[bumpmuncher]

have a look here http://www.ukgser.com/forums/showthread.php?t=32292

 

[r100/7]

here is the photos of the bike i could not get it better quality as it would not load up

 

[bumpmuncher]

you may have a bit more luck with the pictures if you use method 1 from post 2

 

[BigyellowGS]

R100/7:
Bikes looking good! Looks similar to the first incarnation of my bitza (that bikes currently stripped to the bare bones for repainting/and more mods).
If you decide to go down the route of a 21" front wheel (which as you have spokes you could just relace your hub to a 21" rim).. you will need lightly longer rear shocks @ 365mm eye to eye. I've found that Hagon do some trials shocks for about 130 quid which do the trick perfectly.

Pictures.. I've always found the easiest way is to load the pictures to photobucket and take their IMG links and paste them into you posts.

J

 

[r100/7]

just going to run the bike the way it is and then c what needed done lol as i have no money for a respray so be running it the way it is and then my fit a off road front forks and i my need to replace the rear springs as they are rusted to buggery but my free up when i ride it lol