Hi, has anyone bought and fitted an Aoocci c6 pro to their R1250GS. Just wondering if it’s an easy install and also is it permanently wired to the bike or can it be removed and taken with you when you get off and leave your bike. Thanks.
Aoocci c6 pro
- Thread starter Gearup
- Start date
You can use the USB cable it comes with if you want to power it through a usb socket but permanently wired via the ignition source is the better option.
It’s not really designed to be removed every time you stop for a coffee.
Thanks for the info, still not sure if that’s the best way to go or get the Chigee BMW but that is way more expensive. Do you know if the Aoocci can be mounted where the Chigee would go and if the Aoocci is designed to be more or less left on the bike, is it theft proof? Thanks again.
The Chigee fits into the BMW nav mount which locks. In it the Chigee would be as secure as a Nav 6.
There’s no mount to integrate into the BMW mount as there is for the Chigee
I’ve got a Chigee on Himmy 450 and Aoocci on Voge .
The Aoocci comes with a ‘theft proof ‘ mount which is really just a torx bolt ram mount rather than a knob to turn . Not really theft proof but a thief would need tools .
The Chigee has a better build quality but the Aoocci is about 1/3 the price and is still well made . You can get it for about £136 with a discount code and that comes with cameras and TPMS. The Chigee with both is about £450z
Thanks for your help, lots to think about.
Thanks for your help.
I really like the look of that. The 3D printed block is a great solution but I’m not sure I would have the confidence to tackle the wiring of it all otherwise I would probably go for that if the block wasn’t too expensive. Thanks for your help.
Wiring is simple. Use the bikes USB socket for power and just run 2 cables for the cameras.
That sounds doable, I might give that a go. I take it everything works well and you’re happy enough with the set up. Where can I purchase the 3D printed block. Thanks again.
Yes, all great. Not that I can try it out in this weather!
A friend of mine printed the blocks in 2 parts. He says if he gets a few interested he will do some more.
I will ask if you like. Should only be max £10 inc postage.
He says he can do that.
Ideally he would like to do afew more at the same time. And it saves my shoe leather!
It will be next week sometime if that is ok?
I’m not sure I want to go down the route of removing and eventually having to refit the existing nav cradle. I’ll need to get my thinking cap back on. Thanks for all your help though.
enduromecanic
Registered user
Hello Neil,
I would like 1 piece, but I live in Romania, will your friend ship it to me and how much will it cost to send it to Bucharest?
If not possibe to send, I can pay 10£ for the .stl and I will print it out myself.
Let me know
Best Wishes
dont go paying anyone !
Motorcycle-Mount (12mm Bar) for Aoocci C6Pro 6.25 CarPlay Navigation by grimmet | Download free STL model | Printables.com
It＇s just a mount, which sits on top of the four screw-threads on the backside of the Aoocci C6Pro. | Download free 3D printable STL models
www.printables.com
enduromecanic
Registered user
Thank you so much!
I will post photos after I install the unit on the BMW 1200 GSA Navbar
Similar threads
