mgowland
Guest
I have checked through many of the previous postings on Autocom installation but most of them appear to relate the positioning of the control unit itself and not the actual wiring which is where I am stuck.
I wondered if anyone may be able to provide me with a blow by blow description of how to wire the thing into the bike (1150gs ABS) as I have read the Autocom instructions and looked at the bundle of wires under the seat /tank and am none the wiser.
I am particularly stuck as to
1) Which wires on the bike do I connect the red and black cables of the Autocom unit.
2) At which point on the bike that I should make these connections
3) How I should make these connections with minimal disruption to the existing cabling.
The fact that I am posting a question requiring such a simplistic explanation as to how to wire the unit in probably suggests I should take it down to Bridge Motorcycle or the like and get them to do it but I'm sure I'm not the only electrics idiot out there..........
Cheers
I wondered if anyone may be able to provide me with a blow by blow description of how to wire the thing into the bike (1150gs ABS) as I have read the Autocom instructions and looked at the bundle of wires under the seat /tank and am none the wiser.
I am particularly stuck as to
1) Which wires on the bike do I connect the red and black cables of the Autocom unit.
2) At which point on the bike that I should make these connections
3) How I should make these connections with minimal disruption to the existing cabling.
The fact that I am posting a question requiring such a simplistic explanation as to how to wire the unit in probably suggests I should take it down to Bridge Motorcycle or the like and get them to do it but I'm sure I'm not the only electrics idiot out there..........
Cheers