Autocom PRO SYSTEM questions

[FATBOY]

I bought a PRO SYSTEM (made in 1996) cheap, and without instructions. The website does not appear to offer any pdf support so...

Music balance, what does it balance, pasenger/rider? Volume music/radio balance?

Switch with no markings in the middle of the panel. My guess is a Hi/Lo, correct?

Switch marked ON 2/OFF /ON1. I know what the off does but...

Finally, a tiny hole with a brass adjuster small enough to tell you you shouldn't touch. WTF is that for?

Any help, links, info etc GREATLY appreciated. Phil.

 

[beemerboy9]

Here is the link to the PRO-M1 (that was current when I bought in 2001) on the Autocom website. Is that the one that you have (I suspect not somehow)? If it is not, then do ring the factory if you can't get help here.

http://www.autocom.co.uk/pdf/pro-m1_hs.pdf

 

[FATBOY]

Thanks but that's not the one. It looks earlier than that one.
Any ideas? Scan me a copy of your instructions and email me?
Ta, Phil.

 

[sanqhar]

Autocom

I had one of the first Autocoms in 1993 (in the days when they only made one type).

It is not the same as yours buts it sounds like bits are similar.

Music Balance = rider / passenger balance

Switch ??

on1/off/on2 -OFF switched the unit off otherwise 9v battery did not last long.

on1/on2 decided whether the rider/passenger speech just interrupted the music (momentarilly turned it off) or lowered the volume of the music.

The only other input socket was for the music/radio input. These were pre MP3 and Satnav days

 

[FATBOY]

Right on the money. Thanks!

 

[GSrich]

I bought a PRO SYSTEM (made in 1996) cheap, and without instructions. The website does not appear to offer any pdf support so...

Music balance, what does it balance, pasenger/rider? Volume music/radio balance?

Switch with no markings in the middle of the panel. My guess is a Hi/Lo, correct?

Switch marked ON 2/OFF /ON1. I know what the off does but...

Finally, a tiny hole with a brass adjuster small enough to tell you you shouldn't touch. WTF is that for?

Any help, links, info etc GREATLY appreciated. Phil.

Pop me an email direct to [email protected] and I will email you a copy of our instructions over, they will supply you everything you need to know.