Background Electrical Noise on Autocom

[Reckless]

Hi - just fitted an Autocom SPA to my new GSA - under the rear seat and powered through a relay. The Nav 5 feeds via Bluetooth. I am getting some electrical noise on the intercom and a buzz when I apply the front brake. Anyone else experienced anything similar - any advice?


Sent from my iPad using Tapatalk

 

[mcinlb]

Yes, I did used to get some 'noise' through the system. Fitted Autocoms supply filter to the coms unit - sorted.....

 

[Lodgey62]

you might be able to dial it out by adjusting the VOX control,mine use to do somthing like that,though its done allsorts of obscure things but 99%of the time its fine.

 

[Yellow Peril]

Yes, I did used to get some 'noise' through the system. Fitted Autocoms supply filter to the coms unit - sorted.....

That's the ticket will sort

 

[Bobbin-Man]

I currently have the same problem on my Hexhead after swapping from an Autocom Active PLUS to an SPA, maybe the SPA is more susceptible to electronic interference? I've reduced it substantially by maximising the output levels from the Zumo and PMR and reducing the Autocom output levels but it's still evident, especially when using the brakes - my bike has a servo .... I think I'll order a supply filter tomorrow, thanks for the info

 

[adventuredon]

is the negative connected directly to the battery? They advised me that when i had a similar problem. Sorted it