snerkler
Registered user
My top box looked as though it had greasy marks on it so I tried using degreaser on it but it still has smears, what's the best way to clean the aluminium prior to covering in a clear wrap please?
Best way to clean aluminium top box?
- Thread starter snerkler
- Start date
WD40 and scotchbrite
snerkler
Registered user
Thanks, I thought about WD40 but that’ll leave a coating that won’t be good for applying the protective film I wouldn’t have thought?
martinc.d
Registered user
Methylated spirits
95 ron unleaded on a rag or brake cleaner.
Works for me
Works for me
+1 for Autosol.
The only problem with Autosol or Mothers (my preference) is once you start - you’ll need to do whole box(es)!!+1 for Autosol.
- Joined
- Jul 14, 2010
- Messages
- 10,367
- Reaction score
- 3,598
You need to find if it is actually an alloy finish,
It’s more likely a painted finish,so,any abrasive will ruin it.
If you’re just wanting to degrease it you could use acetone or nail polish remover,given it’s used on young ladies fingers it’s about as non toxic as most .
Hmmmmm.
You could also use brake cleaner ( tricluroethlyne)
But that might melt paint.
If it’s just got marks, I’d personally play safe,mebbs a bit of cif onto a wet cloth clean locally then degrease with a mild soap prior to to applying the film.
How times change,if it was an airhead you could use brick acid.
It’s more likely a painted finish,so,any abrasive will ruin it.
If you’re just wanting to degrease it you could use acetone or nail polish remover,given it’s used on young ladies fingers it’s about as non toxic as most .
Hmmmmm.
You could also use brake cleaner ( tricluroethlyne)
But that might melt paint.
If it’s just got marks, I’d personally play safe,mebbs a bit of cif onto a wet cloth clean locally then degrease with a mild soap prior to to applying the film.
How times change,if it was an airhead you could use brick acid.
I've found Elbow Grease cleaning paste and a non-abrasive kitchen scourer to be pretty good.
What about panel wipe?
That’s probably the best tbh.
As mikeyboy said, it’s all about whether painted or lacquered - and likely it is.
So, you’ll fuck whole box using abrasive cream. Alloy on my Harley is all naked and just use Mothers to good effect.
………I actually remember having similar problem on my old oil head when one of the boxes got scratched by a scooter in Italy. The boxes were just alloy, but had a dull/ matt finish. Anyway, I hit the scratch with Mothers and red scotch-brite. Got the scratch off, but made affected area too shiny!! Lol
Ended up doing whole box x 2!!
Ended up doing whole box x 2!!
Attachments
Last edited:
snerkler
Registered user
Where the fuck were you 10 years ago?! lol
Not sure what you’re on about, did I say something out of date??
I was meaning before I made a c*nt of my old boxes!
Bad jokes are even less funny when explained
Similar threads
