For Sale Bike related FREE STUFF……..

Final drive needs bearings doing

As above off a 2007 Adventure
Pick up from Halifax
 
K100 K75 1983 to 1989 Haynes manual - came with my K100RS 16V but not that relevant.

Yours for the cost of postage, maybe four quid?
 
Zumo with cradle

Garage clear out time. Not used for a couple of years, and if I remember correctly, it wouldn't turn on last time I tried. If anyone can make use of it for spares/repair, let me know. Not sure what postage cost would be, but it can't be that bad.
 

Attachments

  • IMG_6709.jpg
    IMG_6709.jpg
    50.7 KB · Views: 239
  • IMG_6708.jpg
    IMG_6708.jpg
    52.9 KB · Views: 241
:thumb
Garage clear out time. Not used for a couple of years, and if I remember correctly, it wouldn't turn on last time I tried. If anyone can make use of it for spares/repair, let me know. Not sure what postage cost would be, but it can't be that bad.

Yes please
 
Whole load of used somewhat scrappy stuff from a 2011 GSA. The bike went 9 months ago and I have been hanging onto this stuff for some strange reason. See pics....

Free, all of it but I really want the lot to go in one collection - from Garstang, Lancs. Delivery possible but wholly at your cost, but I really would prefer collection. Delivery possible reasonably locally in return for chucking a tenner at a Charity.

What we have here is:

Three worn out but functional shocks minus their ESA motors. Two fronts, one rear. Pretty sure they are the white power version. I think all the collets and stuff you need are there too. The two black ones are from my old bike, the white one I bought from here for the ESA motor. You get what I have got, which is what I got back from Wilbers when they fitted the new shocks.

One front ESA motor. This is not working properly (probably at all actually) but if you want to explore how it works, try and repair or sent it off the Tractive it might be worth it.

Yellow box..... The old Throttle Position sensor. Still works but was throwing a little glitch every now and then. These are serviceable.

Lambda Sensor. This is the original with the bike I removed it and fitted a new one trying to diagnose the TPS fault. It made no difference so hung to this for a spare. It should be perfectly OK.

Clutch slave cylinder. Removed as it was leaking. I don't know if its serviceable or not but if it is....

BMW tool roll. I am pretty sure this was with my GSA, but it might be something I have hung onto for years. If so it'll be off a K100RS, and R80ST or R45.

Flappy exhaust valve and motor. Removed as the valve seized, now eased off and seemed to work when I tried it afterwards but stuck with the link pipe as it sounds better. THIS ITEM NOW GONE

Approx 50% worn brake pads. Axle set of fronts, one rear pair.

8 used spark plugs. Removed way ahead of the service interval readying the bike for big trips so should be perfectly OK.

Starter Motor, original bosch one. Needs repairing. I dropped it when I was looking at it and couldnt get it to go again so may be scrap.

Tank bag. Includes all the fittings and the waist pack. Yellowed map case sadly otherwise absolutely fine. Well used though. I liked this bit of kit as it was 99% waterproof.

Used alternator belt. Probably around 6,000 miles on it. Swapped out when I fitted a new alternator. I kept it to be refitted when I next needed to.

There's a breather valve for the final drive hidden on the table somewhere. Removed to fit a DIY high level breather.

Headlamp unit. No glass. Slight burn mark on the dip lens from running HID lamps. Includes two H7 bulbs. The glass can be bought for around £100 (last time I looked) and with the right potting/Silicone should be easy enough to secure in place. This headlamp set projected dip/main way better than the replacement I bought and while apart its an opportunity to finesse the focus so the light where you want it to. AT least that was my plan anyway.

LAST chance. I will split into smaller lots. Just cover the postage and a bit for packaging please.

If you got in touch with me before about anything do so again please.

Pics are all a couple of pages back.
 
LAST chance. I will split into smaller lots. Just cover the postage and a bit for packaging please.

If you got in touch with me before about anything do so again please.

Pics are all a couple of pages back.
PM'd you

Sent from my CLT-L29 using Tapatalk
 
Female textile jacket size 20?

This any good to anyone? Before I bin it?
TBH I wouldn’t want my nearest and dearest wearing unbranded potentially cheap gear on the bike, but it may be of use to someone?
PM me please as I don’t visit these pages often. I’ll give it a couple of days. If nobody wants it, I’ll bin it.
 

Attachments

  • 9168F8EC-702E-4DBF-A369-5C499FF8E52F.jpg
    9168F8EC-702E-4DBF-A369-5C499FF8E52F.jpg
    251 KB · Views: 231
  • BEF6CAEC-E762-4030-A72F-591F34BC9F80.jpg
    BEF6CAEC-E762-4030-A72F-591F34BC9F80.jpg
    261.6 KB · Views: 224
  • 50C1CFA2-121E-43EC-876A-85B7842B571F.jpg
    50C1CFA2-121E-43EC-876A-85B7842B571F.jpg
    245.4 KB · Views: 225
  • 7F9B2FFB-07A8-4804-8AEA-D565888CB459.jpg
    7F9B2FFB-07A8-4804-8AEA-D565888CB459.jpg
    264.2 KB · Views: 222
LAST chance. I will split into smaller lots. Just cover the postage and a bit for packaging please.

If you got in touch with me before about anything do so again please.

Pics are all a couple of pages back.

Everything spoken for. Just awaiting postage costs on one item.

I have put the starter motor in the bin as I decided that probably was scrap, especially as I managed to drop it again and with the weight of it its probably not worth the cost of the postage. It'll be at the bottom of the bin for nearly two weeks if you want me to recover it. The box might be a bit yucky though. ;)
 
Female textile jacket size 20?

Withdrawn and going in the bin. :thumb2
 
Dainese back protector

Does anybody want a Dainese HPC back protector? It's probably 15 years old, used when I did track days but was fortunate enough not to have crashed! Prefer collection from Leicester or from any of our branches, please see www.thepartspeople.co.uk , or you pay the postage cost - would have thought £5 ish?
Cheers
Rich
 

Attachments

  • Back protector.jpg
    Back protector.jpg
    235.5 KB · Views: 570
Does anybody want a Dainese HPC back protector? It's probably 15 years old, used when I did track days but was fortunate enough not to have crashed! Prefer collection from Leicester or from any of our branches, please see , or you pay the postage cost - would have thought £5 ish?
Cheers
Rich
Rich, this would suit me, please - PM inbound
 
1150gs tank bag

Genuine BMW tank bag for 1150gs. Hardly used and in great condition.
Collection only from Markfield, Leicestershire.
Call Klaus on 07 977 34 92 03
 

Attachments

  • C3B6E5FF-821E-4D56-8D40-2BBB2F41EBB8.jpeg
    C3B6E5FF-821E-4D56-8D40-2BBB2F41EBB8.jpeg
    102.2 KB · Views: 490
  • 3B8F9545-BCAE-4855-813D-B44AD833CB5F.jpeg
    3B8F9545-BCAE-4855-813D-B44AD833CB5F.jpeg
    106.2 KB · Views: 490
Pm sent. I can’t call until tomorrow.


Sent from my iPad using Tapatalk
 
@ Pops aka Klaus ...
I would like that.....if still available....pm send
Dibs, 2nd?
 


Back
Top Bottom