Can you give more detail, is the starter turning the motor over as normal? Are there any other symptoms? Are all the normal pre starting lights coming on on the dash? Anything not working. Remote diagnostics is hard enough so a few more clues might help the experts on here to help you.
Fiddle about with the wiring from the ignition switch to the main loom. This is a common failure point. If you get any response from jiggling the cable around you will have found the culprit.
Thanks for the suggestions,the bike is now at a dealers ,there was one 7km away.I suspect the fuel pump,all electrics were normal but the pump wouldn't prime.Will find out shortly when I get back there.
Thanks for the suggestions,the bike is now at a dealers, there was one 7km away. I suspect the fuel pump,all electrics were normal but the pump wouldn't prime.Will find out shortly when I get back there.