Bursig Central Stand

[HGS]

I did post previously regarding the Warrior stand
I now know this is unsuitable as it uses the forward engine mount which is taken up already with crash bars
I have been asking Wunderlich in Germany about the adapter fitting for the Bursig and they confirm it fits the 1250GS and doesn't use the front engine mount but getting answers as to where it fits exactly is proving difficult. They only have a generic picture which is taken from behind the plate....looks like it uses the torque bar fitting bolt and a lower large central nylon bush
An e mail to Bursig themselves has remained unanswered
So...any one got one of these stands for a 2013 LC onwards model and if so could they please let me see a photo of the adapter plate of where it fits
Due to the postage costs if not right, trying to find out before I buy
Thanks

 

[Winjar]

This can help

 

[HGS]

Thanks Winjar
Already seen that
But Wunderlich in Germany have come through with the details of the adapter plate and where it fits to the bike

 

[PitaNaanRoti]

Why don't you ask Constands?
They also have all the fitting instructions on their site as well.

https://www.motea.com/en/amfile/file/download/file/22912/product/234232/

 

[Winjar]

Why don't you ask Constands?
They also have all the fitting instructions on their site as well.

https://www.motea.com/en/amfile/file/download/file/22912/product/234232/

Cheep china, me not put 20k bike on that.

 

[PitaNaanRoti]

Cheep china, me not put 20k bike on that.

Talking out of your arse there sunshine.
German company, shipped from there as well.
I have two of them and they take the ZX10r, ZZR1400, 690 Enduro R and the GS1250 easily.

 

[Boxerlust]

I loved the BURSIG stand I had on my R 9 T Very good & very practical and best of all affordable ! All you have to do adjust the plate that the bike is level with the ground as explained in the directions...

 

[HGS]

I contacted Constands 3 times asking the same question as I asked Wunderlich. The response was vague even allowing for the language barrier as my German is extremely limited to odd items of food and beer

Looking on the net the adapter for the 1250GS with Constands uses the forward engine mount bolt which I have already populated for the Touratech crash bars, as do the Warrior Spider lifts

I cannot get a definite answer from them that it does still use point 'A' on the instructions as per the link above

It's going to cost me more for the Wunderlich one but it fits where I need it to

Thanks though

 

[Winjar]

Talking out of your arse there sunshine.
German company, shipped from there as well.
I have two of them and they take the ZX10r, ZZR1400, 690 Enduro R and the GS1250 easily.

Motea everything is China, Motea only shipping place in Germany, and Constands is bad cheep copy of 1jac good UK company

https://www.1jac.com/

company make motea software
DeltaMaster is also used to map the entire materials planning process of the procurement organization in China. Product volumes and expected arrival dates can be called up along with information such as when, where, and how each product has performed. This information is used to forecast future replenishment requirements and calculate the right order date to ensure timely product availability.

 

[HGS]

I had a 1Jac bought 2016, company stopped producing as the owner retired late 2019, looks like new owners have started it up again in new location. Really well made bike lift and easy operation. Son in law has mine now on long term loan (never get it back)
1Jac don't do an adapter for the GS

 

[PitaNaanRoti]

A copy? I’ve had both of mine since 2014 when 1Jac are showing the 2015 show as being new.

 

[Winjar]

A copy? I’ve had both of mine since 2014 when 1Jac are showing the 2015 show as being new.

Fine I can give other names, but you happy with China rubbish, many not so have good time, I try to keep china away from me, best I can.

 

[PitaNaanRoti]

Fine I can give other names, but you happy with China rubbish, many not so have good time, I try to keep china away from me, best I can.

FFS - it’s not Chinese.
I know where they came from and were manufactured.