can i just say "BO##OX"

steveo

Registered user
Joined
Sep 5, 2006
Messages
111
Reaction score
0
Location
brighton,england
just been out for a ride on the g/s and lost all gear selection up and down:mad:
now thinking of the best way to go, get it rebuilt, prob just a spring gone i would think,but not something i would attempt myself! or a recon exchange from motorworks at 370£ ish:blast.
any ideas from you helpful lot as the best way to go:comfort steve
 
As above, but bear in mind that Steve usually has a waiting list, so don't expect it back in a hurry :D
 
Have you checked the linkage, where it bolts into the gearbox. If the centre bolt has come loose you will not be able to select a gear. Only a thought and a lot cheaper to fix:augie
 
Linkage

:thumb2 Tony worth a look, this happened to too tall trev in Spain last year.

Jaber fixed it!
 
but just in-case its not that simple, i cant remember whats easier,engine forward or swing arm out, its been a few years since i last had to do it:rob
 
but just in-case its not that simple, i cant remember whats easier,engine forward or swing arm out, its been a few years since i last had to do it:rob

No sir, the engine stays in place. :thumb

New clutch as well while it's all apart -

attachment.php


you don't have to take the tank, battery or side panels off when you remove the gearbox -

P.s...from here, I had the same problem a while ago... http://www.ukgser.com/forums/showthread.php?t=35961&highlight=detent+spring
 


Back
Top Bottom