Concept Guard Cam Rack too loose

[redout]

Anyone else have issues with this mount?

I have tried to attach both a gopro hero 4 session and a gopro hero 3+ but cannot get them to fit.

I have inserted several different screws to attach the gopro to the rack but it does not tighten even when fully inserted.

The cameras just move back and forth.

You can see from the pic that the screw is supposed to just be inserted and presumably that tightens the camera in place but it doesn't seem to be happening.

Any suggestions?

 

[Neil W]

could try putting a nut on the other end of the pivot bolt to see if it nips up or failing that if you can find one and if it fits a thin washer between the go pro pivot and the aluminium bracket

 

[redout]

could try putting a nut on the other end of the pivot bolt to see if it nips up or failing that if you can find one and if it fits a thin washer between the go pro pivot and the aluminium bracket

Turns out some of the casings for the GoPro are fractionally too small. I popped on a spare one I had lying around and it fits in good as in stiff not loose. I did fix a nut like you said initially

 

[Neil W]

What is the pic quality like with that mount on the wc models, I have tried loads of different options on mine including a rubber mounting but all of the ones mounted to the bodywork , crash bars and handlebars are very vibey

 

[redout]

Quality is good. I'm using a GoPro session 4 in loop mode. I'll post up some shots shortly.