I’ve installed a Denali CanSmart this afternoon following the instruction. However when I plug it into the computer it says not connected to power. I have checked the fuse and the battery terminal connection and all looks fine. Any ideas?
Denali CanSmart No Power
- Thread starter Jimmymck
- Start date
Try a different USB lead
Are they powered by a switched live which necessitates having ignition on?
It’s not the USB lead, its the main power as its not activating the devices attached.
power should go directly to the battery so not switched,if power and inline fuse ok it might be the unit,i have just returned my cansmart as it was intermitantly not powering up the soundbomb and aux brake lamp,i powered those up independantly and they worked.
I just fitted one to a 70GS and had a problem with the Soundbomb working. First thing R&G asked me was had I connected it to the correct plug on the cab-bus system, I had.
It turned out to be a duff cansmart unit which the changed. One thing to check is the colour of the LED lights at the end of the cansmart.
Hope you get it fixed.
It turned out to be a duff cansmart unit which the changed. One thing to check is the colour of the LED lights at the end of the cansmart.
Hope you get it fixed.
Look at Denalis website there is a reference to the different lights on the unit.
On mine with the unit fitted and connected slow flashing green light with ignition off and solid green light with ignition on.
https://denalielectronics.com/pages/cansmart-user-guide#page-section-1561494930745 use the address and go to trouble shooting, last item is about LED lights.
On mine with the unit fitted and connected slow flashing green light with ignition off and solid green light with ignition on.
https://denalielectronics.com/pages/cansmart-user-guide#page-section-1561494930745 use the address and go to trouble shooting, last item is about LED lights.
Similar threads
