Denali Horn and need for Relais???

[albatross]

Now here is a question …fitting a Denali Soundbomb..it does come with a Relais which it obviously needs .
But replacing the original horn on the 1150GS which has got a Relais, do I need or would it be advisable to fit a 2 nd Relais??
cheers for any advice.

 

[The Other PaulG]

If your original is already wired with a relay, I'd just wire in the new horn using the same wires as the old one and see how it goes. I'd expect that to be fine.

 

[albatross]

Thats what I thought Paul…was just double checking as I can not see the point of 2 relays..
let’s try and see, thanks anyway…

 

[Pekkavee]

The original fuse for the horn is 7,5A.
If that is OK for your Denali, so you can use the original relay.

 

[albatross]

good point, I will check

 

[albatross]

Seems to work fine, but I replaced the 7.5A fuse with a 15 A
all good….

 

[albatross]

Thead closed

 

[albatross]

Glad that I wasn’t able to close this one as the fuse blew after first attempt..
so you do need a relay as the Denali requires 20 A fuse and a 30 A relay …now all sorted…