dyna wide glide project......so the fun starts

bart2181

Active member
UKGSer Subscriber
Joined
Jun 29, 2008
Messages
456
Reaction score
6
Location
birmingham england
Hiya guys has some of you well know I,m the new owners of a one off dyna wide glide.I,m pretty chuffed to bits with it apart from fuel in the engine oil,not idling etc etc.but upon further inspection I have a couple of queries for the experts.main one is I know dynad vibrate but there's a re alignment procedure that I,m struggling to dig out.it has something to do with loosening the mount bolts,starting the engine etc.anyone?at present the front of the engine is resting on the front mount but at the rear there's a large gap between engine and mount so I,m trying to even things up.cheers
 
Dont worry about the current lack of response.

As they tend to be old codgers here, they would have already had horlicks by 7;30pm tucked up in bed asleep by 8 then surface @ 10 am when the carers arrive

:D
 
Dont worry about the current lack of response.

As they tend to be old codgers here, they would have already had horlicks by 7;30pm tucked up in bed asleep by 8 then surface @ 10 am when the carers arrive

:D

Oi...I represent that remark......:dabone

Now, with respect, the 'bike appears to be a bit of a "bitsa" from previous posts. It sure as shit will want a full alignment check as a minimum. I suggest that the bike is taken to someone equipped/experienced at dealing with this. I can PM you some contacts for some decent guys around here (Just west of Brum).
 
Oi...I represent that remark......:dabone

Now, with respect, the 'bike appears to be a bit of a "bitsa" from previous posts. It sure as shit will want a full alignment check as a minimum. I suggest that the bike is taken to someone equipped/experienced at dealing with this. I can PM you some contacts for some decent guys around here (Just west of Brum).
yes pingu if you don't mind that would be much appreciated.cheers:thumb2
 


Back
Top Bottom