dropped my 1250A onto left hand side and need to straighten bars. Anybody have a paint code for 2024 model silver paint for bars
Engine Bars
- Thread starter Burwickbiker
- Start date
The OEM bars are stainless steel, no paint, If you need to repair any deep scratches with filler then spray then Silver Smooth Hemmorite aerosol can give a reasonable finish, if you only paint the damaged areas rather than the whole crash bar.
I did mine and painted to the welds masking up the rest of the bars and unless you get down on your knees to inspect it you'd never know they had been repaired.
If they are bent OEM engine bars are often advertised on flebay like this one https://www.ebay.co.uk/itm/205597417679?_skw=R1250GSA+crash+bar+LHS&itmmeta=01K4NEKF5FGNNS96YB3XDE0MPS&hash=item2fde8fa0cf:g
8kAAeSwr1NoaDaN&itmprp=enc:AQAKAAAA0FkggFvd1GGDu0w3yXCmi1fxeb0pxxab/dDPgaDMIijRIYN2ottsUCtMd5x2uB81O+t/i7zeygML+4uRJTLD1JEJcJozoV361AGXb1XG+5/62VKvnJN9t+Kdis/XtDF3TeUJEuqRfQDLE1tfhbSKMNKrQq/C5w0vylYtWyKmoDjTjMSgyflD5azMA3yubQ/n/O6k/SBvZz2v94kDjodOQsZeW9OLOa6kNIm4uFoGT2bp0hRyaGucl0odNKyR6NtVjsrIEJrlDrjkFo9YWCo3+x8=|tkp:Bk9SR_byza6lZg&pfm=1
I did mine and painted to the welds masking up the rest of the bars and unless you get down on your knees to inspect it you'd never know they had been repaired.
If they are bent OEM engine bars are often advertised on flebay like this one https://www.ebay.co.uk/itm/205597417679?_skw=R1250GSA+crash+bar+LHS&itmmeta=01K4NEKF5FGNNS96YB3XDE0MPS&hash=item2fde8fa0cf:g
8kAAeSwr1NoaDaN&itmprp=enc:AQAKAAAA0FkggFvd1GGDu0w3yXCmi1fxeb0pxxab/dDPgaDMIijRIYN2ottsUCtMd5x2uB81O+t/i7zeygML+4uRJTLD1JEJcJozoV361AGXb1XG+5/62VKvnJN9t+Kdis/XtDF3TeUJEuqRfQDLE1tfhbSKMNKrQq/C5w0vylYtWyKmoDjTjMSgyflD5azMA3yubQ/n/O6k/SBvZz2v94kDjodOQsZeW9OLOa6kNIm4uFoGT2bp0hRyaGucl0odNKyR6NtVjsrIEJrlDrjkFo9YWCo3+x8=|tkp:Bk9SR_byza6lZg&pfm=1
Last edited:
Cheers mate. Appreciate the replyThe OEM bars are stainless steel, no paint, If you need to repair any deep scratches with filler then spray then Silver Smooth Hemmorite aerosol can give a reasonable finish, if you only paint the damaged areas rather than the whole crash bar.
I did mine and painted to the welds masking up the rest of the bars and unless you get down on your knees to inspect it you'd never know they had been repaired.
If they are bent OEM engine bars are often advertised on flebay like this one https://www.ebay.co.uk/itm/205597417679?_skw=R1250GSA+crash+bar+LHS&itmmeta=01K4NEKF5FGNNS96YB3XDE0MPS&hash=item2fde8fa0cf:g
Similar threads
