FF50 lighting problem on 03 1150gsa, FUSE QUESTION

[fair1535]

Lights currently inoperative, checked all wiring and replaced spades to bulbs and switch and further investigation needed to identify cause.

Here is my question, why are the fuses marked 32v after the ampere rating on fuse body? thought it would be marked 12v

Cheers
Steve

 

[Timolgra]

Because that's what they're rated at.

 

[fair1535]

Not as technical as I thought then..

On a brighter note, I discovered one of the pins on the Hella relay fitted under the fuel tank was the problem.