Fitted Rox Risers

[Delboy777]

Heres a couple of pics of the Rox Risers i fitted this morning. No problems with throttle cable as it follows the exact same route as it did before. Incidentally i removed all the small torx screws on the bars that hold on the guards and smeared them with copper grease because the threads were starting to corrode already

 

[amonteirox]

Hi,

Could you please let me know the Rox model?

Tried to put the model Rox 2 "but the brake line was too tight.

http://roxspeedfx.com/product/2in-rise-pivoting-handlebar-risers.htm

Thanks in advance.

 

[Delboy777]

Here ya go http://www.nippynormans.com/product...risers-anodised-r1200gsadventure-rox-1r-av2pp

 

[amonteirox]

Thanks for the link!

Do you have a GS or GSA? Year?

Could you send me some pics to [email protected]?

Many thanks.

 

[Fanum]

Nice engineering....until you look down to those Fugly SS Nylocks underneath....wtf were they thinking?

 

[Timolgra]

Nice engineering....until you look down to those Fugly SS Nylocks underneath....wtf were they thinking?

I see NN is stocking Heath Robinson's bits for GS's now as well.

 

[Fluffmeister]

Not a fan myself, but if it works, then good on ya! Could grab some plastic nut covers off ebay to cover up the aesthetically displeasing nylocs

 

[Delboy777]

Not a fan myself, but if it works, then good on ya! Could grab some plastic nut covers off ebay to cover up the aesthetically displeasing nylocs

Fair comment, but when in the seat, ya dont see them Suppose they are in keeping with the "agricultural" image of the GS
Question is what colour covers ? Only seems to be Black/White/Grey. Unless i buy some chrome 17mm wheel nut covers, what do ya think ?

 

[Bendy toy]

How about stainless dome nuts and PTFE tape on the threads to stop them loosening.

The anti vibe works best with a little compression on the rubbers but not too much.