Fitting AS7 Autoswitch

[Mick_rw]

Has anybody carried out the installation of the AS7 Autoswitch, which enables fog lights to be switched on/off thru the indicator cancel switch.

I have a copy of the installation instructions from Autoswitch, but am not sure which wire on the cancel switch to use. It was real easy on the 1150 but not so simple on the 1200.

Have done a search of the forum with no luck.....

 

[Deleted account 190920001]

search for autoswitch and it is the 8th post bellow yours cunningly called AS7 Autoswitch. Here it is anyway http://www.ukgser.com/forums/showthread.php?t=278081&highlight=autoswitch

 

[Mick_rw]

Thanks .....

search for autoswitch and it is the 8th post bellow yours cunningly called AS7 Autoswitch. Here it is anyway http://www.ukgser.com/forums/showthread.php?t=278081&highlight=autoswitch

for that did a search with AS7 but came up with nothing, didn't think of Autoswitch....

 

[Mick_rw]

AS7 Autoswitch Pictures....

search for autoswitch and it is the 8th post bellow yours cunningly called AS7 Autoswitch. Here it is anyway http://www.ukgser.com/forums/showthread.php?t=278081&highlight=autoswitch

Followed the instructions as per Marki_GSA's link, good set of instructions, as they lacked any pictures have added a few here.

These show just the wiring for the actual switch.....

This is the connector refered to in the instructions....

The relay I fitted by the battery under the seat, makes thing easier if relay needs swapping out........

 

[Deleted account 190920001]

Good pictures, I am sure they will help a few people. Does the AS7 work well for you?

 

[Mick_rw]

Good pictures, I am sure they will help a few people. Does the AS7 work well for you?

So far so good....works as it says.....

 

[Buckingham]

Useful thread & yes I'm resurrecting it !
What was the connection into the red/green wire used for ? Is that an ignition-live ?