WindyChuffer
Registered user
Fitting Q:
Just been reading the instrukshuns for this, which in true TT style, are a bit light. So I need to ask about fitting it.
- The TT tank has 2 x stop cocks at the 2 lowest points either side of the bike. These feed the main tank.
- Now the TT instructions say to drill the main tank and install two hoses to it, and I guess these go to the stop cocks as above. Instructions are not clear here.
- I don't like the idea of drilling the main tank as it introduces potential leak points and makes for a lot of work.
I'd prefer to fit it another way. So here goes:
- The original tank has a vent pipe. Surely I can run this, via a T piece to the aux tank stop cocks. This way the original tank is filled by the aux tank as fuel is used.
- Before refuelling, clearly I would have to close the air vent on the aux tank BEFORE opening the original tank cap otherwise fuel will drain from aux to main and potentially overflow onto the floor.
Have I missed anything?
Why on earth would I have to drill the main tank as per TT instructions?
Ta !
Mike.
Just been reading the instrukshuns for this, which in true TT style, are a bit light. So I need to ask about fitting it.
- The TT tank has 2 x stop cocks at the 2 lowest points either side of the bike. These feed the main tank.
- Now the TT instructions say to drill the main tank and install two hoses to it, and I guess these go to the stop cocks as above. Instructions are not clear here.
- I don't like the idea of drilling the main tank as it introduces potential leak points and makes for a lot of work.
I'd prefer to fit it another way. So here goes:
- The original tank has a vent pipe. Surely I can run this, via a T piece to the aux tank stop cocks. This way the original tank is filled by the aux tank as fuel is used.
- Before refuelling, clearly I would have to close the air vent on the aux tank BEFORE opening the original tank cap otherwise fuel will drain from aux to main and potentially overflow onto the floor.
Have I missed anything?
Why on earth would I have to drill the main tank as per TT instructions?
Ta !
Mike.