Front brakes locked on

[stross]

Hi all I have a problem today I was fitting rear led light and all it says is rear light out but it isn't next I fitted hid on the front ok then I fitted the wunderich tfi generation 111 fuel injection mod when fitted reset the computer trottle open closed 3 times but now I have noticed that the front wheel is clamped closed ? Is it the abs or a fuse I need help thanks

 

[Mr K]

No idea about your "tfi" thingy, but your LED tail light proabably isn't Canbus compatible and your RHS handguard may be touching the front brake lever.

 

[harry]

Hi all I have a problem today I was fitting rear led light and all it says is rear light out but it isn't next I fitted hid on the front ok then I fitted the wunderich tfi generation 111 fuel injection mod when fitted reset the computer trottle open closed 3 times but now I have noticed that the front wheel is clamped closed ? Is it the abs or a fuse I need help thanks

Check your RHS hand Guard is not fouling Front Brake lever

 

[stross]

Hi the brake lever is not touching does the abs have a fuse? If so wear is it

 

[Schtum]

Hi the brake lever is not touching does the abs have a fuse? If so wear is it

There are no fuses on the R1200. It has a CAN-bus system.

 

[GSmonkey]

The computer doesn't like the rear LED. Was it 1200GS compliant? Either way, put the normal rear bulb back in to clear the brake fault and see where you get.

 

[stross]

this morning the wheel is free i have took out the rear led and replaced it with one from nippy norman which is cam bus ok the rh guard was over the brake a little is it ok or will it jam on again ?

 

[luckylucian]

Suggest you rotate the guard so it does not touch the lever at all, mine has about 10mm clearance

 

[stross]

thanks i have done now something so small one big problem