Front wheel removal tool

[PhilBolton]

I hope Richard Dover, the originator of this thread, will forgive this - but I had these made up and I have some spare.

Made using a Genuine BMW rear wheel bolt and a piece of hex. bar machined and tapped to accept the bolt, the bolt then welded to the bar.

So, the Torx bit you already carry (?) for rear wheel removal will fit the front wheel too!
The hex. bar is long enough to accept a socket, ring spanner or even an open-ended or adjustable spanner if things are desperate enough.
But it's small enough to take no room in the toolkit.

I had 20 made and will keep two myself, so 18 are up for grabs!
Anybody interested -- email me.

£10 each inc UK P&P

Phil

 

[SVENA]

I had 20 made and will keep two myself, so 18 are up for grabs!
Anybody interested -- email me.

£10 each inc UK P&P

Phil

HI Phil,
Looks very handy and I'm very interested, but can't email you. I'm at svena "at" ofir.dk, please avise on how to order and payment.

regards
svena
R1200GS
Denmark

 

[CuriousYellow]

I hope Richard Dover, the originator of this thread, will forgive this - but I had these made up and I have some spare.

Made using a Genuine BMW rear wheel bolt and a piece of hex. bar machined and tapped to accept the bolt, the bolt then welded to the bar.

[........]
I had 20 made and will keep two myself, so 18 are up for grabs!
Anybody interested -- email me.

£10 each inc UK P&P

Phil

Hi Phil,

Couldn't I'd like on, PM sent.

 

[Bots]

Hi Phil,

I am also interested in one tool.
You can mail me at [email protected]

Thanks.

 

[Deleted account 210609001]

PM sent to you Phil.

You can e-mail me at bmwk12rs"at"fsmail"dot"net

Robin.

 

[Wapping]

Phil,

I will take one please.

PM sent.

Richard

 

[Seatownmaster]

Hi Phil,
I would like one please. email on adrian 'at' seahill.co.uk
Thanks
Adrian

 

[PhilBolton]

Bump--------

9 ordered - (4 sent) - 9 remaining - any more takers - pm or email me

£10 inc UK P&P (email "pipbolton 'at' gmail.com)

Phil

 

[Sgt Bilco]

Phil

You have a pm

 

[Bots]

Hello Phil,

I received my tool today.

Thanks for the good service!

Best regards, Olivier.

 

[ross]

Hi Phil,

You have a pm.

Cheers, Ross.

 

[Andy Davies]

Phil

You've got mail!

Andy

 

[PhilBolton]

quote from Bots:-

"I received my tool today.

Thanks for the good service!

Best regards, Olivier."



No problem - glad to help -------- Phil

 

[phc1058]

Hi Phil
pm'd you a couple of days ago but heard nothing yet, do you still have any available

thanks

 

[PhilBolton]

pmc1058 - I've just checked my pm inbox and nothing there from you, and I'm sorry to have to tell you that they've all been allocated.
I still have some, waiting for cheques and delivery addresses, so if one of the remaining results in a "no-sale" then I'll put you at the top of the list, OK?

Also, if there is sufficient demand I could always have another batch made.

Anybody who wants to have one made for themselves, it's easy:-

1 genuine BMW rear wheel bolt (mine cost £2.50 each)
1 small engineering company with lathe and mig/tig welding to machine the appropriate countersink angle and tap a thread into a piece of 22mm hex bar to accept the bolt, and then lock weld the bolt to the bar at the tapped end.
And fanny's your aunt


Cheers -- Phil

 

[phc1058]

Hi Phil

can I double check that your mail adress is "[email protected]"

thanks

 

[PhilBolton]

yup! although I had avoided posting it into the public domain - Phil

 

[PhilBolton]

yup! - Phil

 

[Deleted account 210609001]

Thanks for mine, Phil. Cracking idea.

 

[phc1058]

Hi Phil
thanks for your reply, if any of the current "allocated" ones result in a no sale, I would like to take it off your hands. You can email me at "[email protected]"
cheers
Paul