fuel level 32 mm bings

[chrisshrops]

Hello airhead chums
Do any of you good people know optimum the fuel level in the float bowls on 32 mm bings, I have set the floats parallel with the carb body but wonder if there is a more precise measure .
Alternately am I pissing in the wind a medling to much ?
your collective wisdom would be appreciated

 

[Kenny]

That is the correct setting.

 

[solidstate100]

Yep, does it for me......

 

[chrisshrops]

tremendous

 

[Beemerboff]

A mm or two either way in the level doesnt seem to make a lot of difference.
Some folks suggest removing the float bowl carefully and measuring the depth in the bowl, as this takes into account things like float weight and wear in other places .
A line scribed 1/2" down from the top of the bowl seems near enough for a 32 mm carb.
The fuel will hang in the pipe if you do one side at a time, refilling the system after the first side