Genuine reproduction 719 mirrors

[GrinningGSer]

Originally “£36.76 delivered”
The Purchaser sent me this screenshot yesterday
Can’t be too hard to find this ?
Even the advert shows , what appears to be , part numbers .

Edit ; try this at your own risk because could be complete billhooks ;

R1250 GS R1200 GS Motorrad Rückspiegel Für BMW F800 R F750 GS F850 GS/ADVENTUER Aluminium Einstellbare Seite Rückspiegel - AliExpress 201355758

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

 

[Hartley]

Those look like the ones i bought.

Just to clarify, the originals I had on my TB GS have the machining detail that follows the profile at the end of the mirror arm.
There’s are some advertised like that on Ali but ive seen both designs on same advert.
The area where they attach to the handle bar is slightly different too.

 

[Nick Marshall]

I have found with anything from China.

You get what arrives. Not necessarily what is in the adverting photo.
Quite usually, as in a few topboxes recently ordered. There are sometimes up to three different items. All in the same advert. All with slight variations.

 

[GrinningGSer]

Yes Hartley , where your arms join the mirror are not the same as in my photo . Does it matter ? No .

 

[Hartley]

Yes Hartley , where your arms join the mirror are not the same as in my photo . Does it matter ? No .

was only trying to clarify the difference should anyone particularly want one or the other.

 

[The Marching Onion]

Mine came with the genuine ones when I bought it, and they are a pain in the a**e. Every couple of rides, I have to tighten them up, which is annoying as you have to remove the little cover with the smallest screw in NATO. I have to carry a set of allen keys with me just in case, as there has been times they've come loose on the M6

I might get some of these to see if they are any better.

 

[KJB]

Mine came with the genuine ones when I bought it, and they are a pain in the a**e. Every couple of rides, I have to tighten them up, which is annoying as you have to remove the little cover with the smallest screw in NATO. I have to carry a set of allen keys with me just in case, as there has been times they've come loose on the M6

I might get some of these to see if they are any better.

Lock tight

 

[Pukmeister]

Mine were installed using low strength thread lock and have remained in place exactly how I set them.

 

[Robbieben]

Mine came with the genuine ones when I bought it, and they are a pain in the a**e. Every couple of rides, I have to tighten them up, which is annoying as you have to remove the little cover with the smallest screw in NATO. I have to carry a set of allen keys with me just in case, as there has been times they've come loose on the M6

I might get some of these to see if they are any better.

Loctite 343 on the allen bolts will sort that out.