Givi Airflow AF330 help please

[jonny5859]

Ok so I need help, I did a search and looked through some of the airflow threads but couldn't see my answer

I have just fitted it to my bike but I think I may have got the bottom adjusters in the wrong order

I have tried but cannot fit the adjusters in along with the silver sleeve that went over the threaded screw, pictures below

I can get them fitted if I leave out that sleeve and it looks like this

Could some kind soul please enlighten me on their install and even a picture of the order the adjusters go in?


Sent via TapaTalk

 

[adventuredon]

I had nothing over from my install. I think. I'll get a pic tomorrow

Sent from my SM-G920F using Tapatalk

 

[stonehenge]

They need the longer GSA adjusters that came standard on all later GS's.

 

[jonny5859]

That's great thanks


Sent via TapaTalk

 

[jonny5859]

They need the longer GSA adjusters that came standard on all later GS's.

it is a 2010 GSA is that not ok?

 

[adventuredon]

Mine is a standard 2010 gs

Sent from my SM-G920F using Tapatalk

 

[jonny5859]

Anyone else have some insight, could maybe send me a picture showing the order of the fixing?




Sent via TapaTalk

 

[Bendy toy]

I have a GSA. The screen grommets (whatever they are called) are built to carry the additional screen support bar so were too long for the AF330.

They have interlocking fingers so the inside and outside line up correctly. Mine had been mangled before I bought the bike so I ended up cutting off the fingers to 50% length. I also have only a short barrel nut on the inside and no support sleeve. I use anti seize on the M6 threads because they seem to corrode all too easily.

 

[jonny5859]

I also have only a short barrel nut on the inside and no support sleeve.

Support sleeve as in what's in my hand in the picture? so it's should be ok then?

The screen feels tight and doesn't move and I took it up the road for a run with it all seeming ok


Sent via TapaTalk

 

[Bendy toy]

I don't have the metal internal sleeve which is probably how my plastic grommet fingers got twisted & mangled. But saying that, the GSA grommets would have fingers too long for the thinner Givi screen. GS grommets would probably be ok.

 

[jonny5859]

ok I'll just go with it for now as it all seems tight and secure enough, cheers!