Gsa 2010 Vibration 2500 rpm

JFC

Registered user
Joined
Feb 21, 2006
Messages
139
Reaction score
0
Location
Cardiff, UK
Buzz/rattle from front at this rpm - any ideas, it's not the screen (or anything else I can grab while riding) and is it normal/usual?

Thanks
 
Check the spotlights are tight and not touching the crash bar......

Thats what happened with mine......I did think it was the screen adjustment screws but turned out to be the spots....

:thumb
 
Was the left aux light, the units comenin two pieces and the fixing screws were slightly loose - all tightened and annoying (to the point of trade-in) buzz has gone away
 
Mine did this and took me several trips to realize it was the back of one of the spot lights vibrating against the mounting bar.:blast I just had to angle it up slightly more to stop it.
 
mysterious vbes

mine did the same at 2500 rpm. Mine was the spot lamps too. after some readjustment , this cured my vibration. This has to be checked from time to time as it does come back and need redjusting.

hope this helps

Tony
 


Back
Top Bottom