Gsa front head lamp

[mozencesme]

Hi guys
I tried to change my front short light bulb and i think i have pushed the new bulb a bit hard while changing it and I heard the click sound from inside of headlamp cover, later when I started the bike lamp is showing very high I managed to take it down a bit but still cars beeping me.is there anyone had the same problem? i didnt try to open all headlamp cover.

many thanks

 

[TeaPig]

You've dislocated at least one of the two tiny plastic ball and socket pivots that holds up the inner headlamp unit (the reflector). It's not uncommon as the design is a piece of cr*p. If you feel inside the headlamp you'll feel that the reflector will wobble about

The solution is not without a degree of hassle, there are several threads on the subject going right back to the 1150's. If you do a search you'll find how to fix it, the options involve a nifty bit of work with a bent coathanger or drilling a small hole up from underneath and pushing the plastic socket with a nail until you can pop the joint back in.

You'll need to take the headlamp off first and then get fiddling. The only alternative is a new headlamp unit as it won't come apart, so be patient and good luck!

 

[mozencesme]

many thanks teapig