Glyno
Registered user
For a friend. Wanting a support bar for a GSA Screen please. Thanks in advance.
GSA screen support bar wanted.
- Thread starter Glyno
- Start date
Glyno
Registered user
Bump. Still wanting. 
Glyno
Registered user
Weekend bump.
Bendy toy
Registered user
What's wrong with the original?
Glyno
Registered user
Bendy toy
Registered user
There isn´t one, my mate wants to fit a GSA screen to his GS.
Tell him to get a Givi AF-330. The GSA screen is big but its also rubbish, causing a lot of head bashing turbulence as air fights to fill the space behind it.
Rubbish!? Rubbish.
I've been using a GSA screen for about nine years. Love it.The support bar was £125.00 back then. I couldn't get a used one then either. Good luck.
Val.
Ive got an AF330
How good... with just the lower screen fitted and tilted in pos 2 ,
it was ok in the dry, but put rain right onto the visor .. not good.
I had to have the visor down all the time
When i got the right brackets and the upper screen deep joy,
Visor up, upto about 60-70mph no buffetting whatsoever.
Only negative, it does amplify engine noise if your pulling away in low gear, low revs
Mart
How good... with just the lower screen fitted and tilted in pos 2 ,
it was ok in the dry, but put rain right onto the visor .. not good.
I had to have the visor down all the time
When i got the right brackets and the upper screen
deep joy, Visor up, upto about 60-70mph no buffetting whatsoever.
Only negative, it does amplify engine noise if your pulling away in low gear, low revs
Mart
Bendy toy
Registered user
I've had GS screen noisy with head vibrating turbulence.
GSA less noisy but turbulence is worse.
Wunderlich taller GSA style screen just as bad as OEM
Givi AF330. On a clear road no turbulence virtually no wind noise. On m-ways reduces traffic turbulence. In summer delivers a cooling draught especially with the winglets removed.
What's not to like.
GSA less noisy but turbulence is worse.
Wunderlich taller GSA style screen just as bad as OEM
Givi AF330. On a clear road no turbulence virtually no wind noise. On m-ways reduces traffic turbulence. In summer delivers a cooling draught especially with the winglets removed.
What's not to like.
The support brackets are a tad expensive and being aluminium they tend to get written off in a crash so are difficult to get hold of from breakers, occasionally appear at motorworks, Sherlocks etc
Bendy toy
Registered user
My GSA screen frame got bent when I let the bike fall into a fence. No other harm done. It gave me the excuse to get a Givi 330 screen. Less money than the GSA screen support frame and does a much better job. It also hasn't crazed and cracked at mounting holes like the OEM GSA screen does.
I have mine with short risers on the front and the back set just above the lowest slot.
I have mine with short risers on the front and the back set just above the lowest slot.
Glyno
Registered user
One more try..bump
Similar threads
